Walksnail Avatar HD Goggles L FPV Goggles with Kit V2 (Dual Antennas) 4.5in 1080P, 22ms, 4km

Overview

Walksnail Avatar HD Goggles L with Kit V2 (Dual) is an FPV goggles and digital video transmission combo designed for HD FPV flying, combining Goggles L head tracking with the Avatar HD Kit V2 for low-latency video and recording support.

Key Features

• AVATAR HD Goggles L: 4.5" 1080P HD screen; supports head tracker; new optical design
• Head tracking via an in-house full-stack image transmission head tracking system with a nine-axis gyro module
• H.265 encoding; 1080P/60FPS FPV video
• High-resolution imaging at 1920X1080; 4.5-inch HD display
• Micro SD card slot for flight recording
• Directional antenna gain up to 4.9 dBi
• PPM signal output to radio controllers via 3.5mm headphone TX connector (then outputs to the drone)
• Goggles power input: 2-6S
• Detachable lens design supports nearsighted, farsighted, or blue light-blocking lenses
• Front cover light bar design
• Polyurethane foam face mask to improve comfort and reduce light leakage
• Avatar HD Kit V2 (Dual Antennas Version): dual antennas; 22ms low latency; 4km range
• Compatible 4K; 1080P/120fps compatibility; supports Gyroflow; Ranging Mode
• FOV 160°; light weight design
• Built-in 32G storage
• Power input listed for the kit: 6V-25.2V
• Native 4:3 high-definition sensor (stated as the only native 4:3 high-definition sensor in the FPV industry)

Specifications

Avatar HD Goggles L

Walksnail Avatar HD Kit V2 (Dual Antennas Version)

What’s Included

• Goggles L x1
• Kit V2 (Dual) x1

Applications

• HD FPV flying with Walksnail Avatar HD digital video transmission
• Head-tracked FPV setups (when paired with a compatible gimbal for pan/tilt control)
• Flight recording via Micro SD card slot and built-in storage (as specified)

For product setup and compatibility questions (radio PPM output, power input, recording media), contact support@rcdrone.top or visit https://rcdrone.top/.

Details

The Walksnail Avatar HD Goggle (Goggles L) pairs a 4.5-inch 1080P screen with support for head tracking and a refreshed optical design.

Head-tracking support helps build immersive FPV setups when paired with compatible pan/tilt control.

Power is supplied via an external battery lead, with onboard controls accessible from the side.

The foam face interface is shaped to improve comfort and reduce light leakage during flights.

Record flights directly to a Micro SD card for easy review and sharing.

An updated optical layout is designed to keep the image crisp across the display area.

The front light bar styling and compact housing keep the setup clean and portable.

Detachable lens support makes it easier to set up nearsighted, farsighted, or blue light-blocking lenses.

Avatar HD Kit V2 adds low-latency digital video transmission with onboard storage for recording.