Walksnail Avatar HD Kit V2 FPV System with Avatar V2 Camera & VTX, 5.8GHz, H.265, 4:3 Sensor
Walksnail Avatar HD Kit V2 FPV System with Avatar V2 Camera & VTX, 5.8GHz, H.265, 4:3 Sensor
CADDXFPV
Couldn't load pickup availability
Overview
The Walksnail Avatar HD Kit V2 is a digital FPV system combining the Avatar V2 camera and Avatar V2 VTX module to deliver 1080p HD FPV with low latency. It uses H.265 encoding and a native 4:3 image sensor option (4:3 native / 16:9), with support for 1080P/120fps compatibility and a 160° wide-angle field of view.
Key Features
- 1080p HD FPV with H.265 encoding
- Average latency: 22ms
- Ranging Mode
- Claimed 4 km range
- Camera V2: 2K pixels, native 4:3 sensor, 160° FOV, F2.0 aperture
- Built-in VTX storage options: 8G / 32G; recording: 1080p / 720p
- Gyroflow support (only with 32G VTX)
- Wide power input: 6V-25.2V
- VTX mounting holes: 25.5*25.5mm and 20*20mm
- Single-antenna design (1x IPEX) with optimized antenna base and frequency button position
- Enhanced TVS protection (as stated)
- GPS anti-jamming (as stated)
- Avatar goggles features mentioned: HD 1080p OLED dual micro displays, 46° FOV, adjustable focus, HDMI output
For installation or compatibility questions (Betaflight / Inav / Fettec / ArduPilot / Kiss), contact support@rcdrone.top or visit https://rcdrone.top/.
Specifications
| Camera | |
|---|---|
| Model | Avatar V2 camera |
| Image Sensor | 1/3.2-Inch 4Mp 4:3 sensor |
| Resolution | 1080P/60fps; 720P/100fps; 720P/60fps; 1080P/120fps compatibility; 1080P/100fps compatibility |
| Ratio | 4:3 native / 16:9 |
| Lens | 2.1mm |
| FOV | 160° |
| Aperture | F2.0 |
| Shutter | Rolling shutter |
| Min. Illumination | 0.001Lux |
| Weight | 7.2g |
| Dimensions | 19*19*22mm |
| Coaxial Cable | 140mm |
| Gyroflow | Only 32G VTX Supported |
| VTX | |
| Model | Avatar V2 module |
| Communication Frequency | 5.725-5.850GHz |
| Transmitter Power (EIRP) | FCC: <30dBm; CE: <14dBm; SRRC: <20dBm; MIC: <25dBm |
| I/O Interface | JST1.0*4 (Power in); JST0.8*6 (USB) |
| Mounting Holes | 25.5*25.5mm; 20*20mm |
| Dimensions | 33.5*33.5*10.5mm |
| Storage | 8G/32G |
| Recording | 1080p/720p |
| Weight | 17.6g |
| Operating Temperature | -20 to 40°C |
| Channels | 8 |
| Wide Power Input | 6V-25.2V |
| Supported FC System | Betaflight; Inav; Fettec; ArduPilot; Kiss |
| OSD | Canvas mode |
| Latency | Average delay 22ms |
| Antenna | 1 (IPEX) |
| Avatar V2 Antenna | |
| Polarization | LHCP |
| Bandwidth | 5600MHz-6000MHz |
| Gain | 1.9dBi |
| VSWR | <= 1.5 |
| Input Impedance | 50 ohm |
| Interface | IPEX-1 |
| Size | R15 x 45mm (without cable) |
| Weight | 2g |
| Goggles (features stated) | |
| Displays | HD 1080p OLED dual micro displays |
| Field of View | 46° |
| Focus | Adjustable focus (no corrective lenses required, as stated) |
| Output | HDMI output |
Packing List
- USB transfer extension cable x1
- 4 Pin silicone cable x1
- M2*4mm screws x8
- M2*5mm screws x4
- M2*6mm screws x4
- M2*14mm screws x4
- M2*5*0.5mm gasket x4
Applications
- HD digital FPV video link upgrades for FPV drones
- Freestyle and racing setups needing native 4:3 / 16:9 options
- Builds requiring 20*20mm or 25.5*25.5mm VTX mounting
Details
A compact digital FPV upgrade that pairs the Avatar V2 camera with the Avatar V2 VTX for HD flying.
The Avatar V2 VTX module uses a ribbed heat-sink style case with multi-hole mounting pattern for FPV builds.
Single-antenna VTX setup with camera-to-VTX coax connection for a clean, lightweight install.
Core features at a glance: 1080p support, low-latency link, wide power input, and onboard storage options.
Choose native 4:3 for more vertical view on race frames, or switch to 16:9 for a widescreen look.
Onboard recording supports stabilized footage workflows when paired with compatible VTX storage.
Multiple angles of the VTX highlight connector placement, mounting points, and low-profile case design.
Rugged, compact VTX housing designed for tight FPV stacks and durable installs.
Built-in storage provides a clean recording option without relying only on external DVR.
Sample FPV flight footage demonstrates HD clarity and wide field of view during fast movement.
Digital video link between the Avatar goggles and the VTX keeps the setup simple with a single antenna.
OLED micro-displays in compatible goggles deliver strong contrast for terrain and shadows.
Goggle fit profile view with head strap for a secure, comfortable FPV viewing setup.
Ergonomic goggle body with dual antenna mounts for reliable reception during flights.
HDMI output makes it easy to mirror the goggle view to an external screen for spectators or bench setup.
On-screen menu provides quick access to channel, settings, ranging mode, and playback controls.
Dimension diagram helps confirm camera and VTX fit for 20×20 mm and 25.5×25.5 mm mounting patterns.
Wiring diagram shows USB, UART, and power connections for flight controller integration and wide-voltage input.
The Walksnail Avatar HD Kit V2 includes the camera, VTX module, antennas, wiring leads, mounting hardware, and setup guide for a complete install.
Related Collections
