Skip to product information
1 of 6

ZD550 550mm / ZD680 680mm Carbon Fiber Quadcopter - Pixhawk 2.4.8 Flight Control M8N 8N GPS 5010 750KV Motor 40A ESC Combo Set

ZD550 550mm / ZD680 680mm Carbon Fiber Quadcopter - Pixhawk 2.4.8 Flight Control M8N 8N GPS 5010 750KV Motor 40A ESC Combo Set

RCDrone

Regular price $665.90 USD
Regular price $932.26 USD Sale price $665.90 USD
Sale Sold out
Tax included. Shipping calculated at checkout.

9 orders in last 90 days

Color

If you have payment problems, pls refresh the page or "Chat with us".

Free Shipping: 9-15 days to arrive.

Express Delivery: 5-8 days to arrive.

Warehouse: China/USA/Europe, can delivery to all countries.

ZD550 550mm / ZD680 680mm Carbon Fiber Quadcopter SPECIFICATIONS

use for: multicopter

Use: Vehicles & Remote Control Toys

Upgrade Parts/Accessories: Frame

Tool Supplies: Grinded

Technical parameters: Value 3

Size: ZD550 550mm / ZD680 680mm

Remote Control Peripherals/Devices: Battery Charging Units

Recommend Age: 12+y,14+y

RC Parts & Accs: Motor Components

Origin: Mainland China

Name: ZD550 / ZD680

Model Number: ZD550 / ZD680

Material: Carbon Fiber

Four-wheel Drive Attributes: Slot

For Vehicle Type: Airplanes

Flight Control: Pixhawk 2.4.8

Color: Black

Brand Name: Readytosky

Upgrade F550 ZD550 550mm Carbon fiber Quadcopter Frame FPV Quad with Carbon Fiber Landing Skid
Parameters:
- Diagonal wheelbase: 550mm
- Landing gear height: 260mm
- Weight: 630 ±2 g
- Material of the main board : 3k full carbon fiber
- thickness of the main board : 1.5mm
Recommended configuration:
- Motor:  3508
- Prop: 12-15 inch CW CCW
- ESC: 30A(2-6s) ; 40A (2-4S)
- Flight control: APM opensource flight control
- Battery: 4-6S Lipo
 
Upgrade ZD680 680mm Carbon fiber Quadcopter Frame FPV Quad with Carbon Fiber Landing Skid
Parameters:
- Diagonal wheelbase: 680mm
- Material of the main board : 3k full carbon fiber
- thickness of the main board : 1.5mm
Recommended configuration:
- Motor:  5010
- Prop: 15 inch CW CCW
- ESC: 30A(2-6s) ; 40A (2-4S)
- Flight control: APM/PIXHAWK opensource flight control
- Battery: 4-6S Lipo
 
 
 

Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller


Features:

1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;

2. 14 PWM / servo output;

3. Bus interface (UART, I2C, SPI, CAN);

4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;

5. Provide automatic and manual modes;

6. Provide redundant power input and failover;

7. Multicolor LED lights;

8. Provide multi-tone buzzer Interface

9. Micro SD recording flight data;


Specifications:


Microprocessor

1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit

2. frequency: 168MHZ, 256K RAM

3.32 STM32F103 backup coprocessor


Sensor

1.L3GD20 3-axis digital gyroscope 16

2.LSM303D 3-axis accelerometer 14 / Magnetometer

3.MPU6000 6-axis accelerometer / magnetometer

4.MS5607 precision barometer


Interface

1 .5 high voltage compatible UART 1, 2 with hardware flow control

2. 2 CAN

3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input

4.Futaba SBUS compatible inputs and outputs

5.PPM Signal Input

6.RSSI (PWM or voltage) Input

7.I2C

8.SPI

9.3.3 and 6.6VADC input

10. External MICRO USB Interface



5010 750kv Motor :
Description:
These are really great outrunners. We've tested this line and they work extremely well.
This is 5010-750kv  Brushless Motor
Features:
1.Machined aluminum front housing with four fan-style cooling holes that pump air through the motor while it runs.
2.Rear threaded mounting holes with both 16 mm and 19mm hole spacings fit a variety of applications.
3.Specially designed NdFeB magnets with high temperature rating for trouble-free operation.
4.High Temperature 140 C (356 F) rated wire is used for winding the motors to minimize the risk of burning up the motor.
5.High quality stator plates are epoxy coated on the inner surface to prevent winding shorts. 0.20mm stator plate id used on this motor 5010.
6.High quality shielded and permanently lubricated ball bearings are used to support the motor shaft in all our motors.
7.High temperature adhesives are used to secure the stator windings and prevent them from shifting and getting pinched or shorting out .
Motor size: 50*10mm
Shaft size: 4mm
Weight: 80g
KV(rpm/v): 360/750
Battery: 2-6Li-Po
ESC: 20-40A
Best working with props of 14-16"
Aerial video://v.ku6.com/show/ga7IrggXzA9ew-NVGV20pQ...html?st=1_9_2_1&nr=1
 

Specification:
Brand:Hobbywing
Model Number:XRotor-40A
Cont.Current:40A
Burst Current(10sec):60A
BEC:None
Lipo:2-6S
Programming:Timing(high/middle)
Weight:26g
Size:68x25x8.7mm
Plug:Φ3.5mmx3
Usage:RC Multicopter
APAC means Asia-Pacific Version,the official ESC sold in Asia-Pacific areas.

 
NOTE : The new version of ZD550 , mainboard is like this.
Note :Due to shipping restrictions, will be shipped in 2 or 3 parcels .
 
 
- Flysky i6 with ia10b receiver x1
- ZD550 Carbon Fiber Quadcopter frame kits x 1
- Carbon fiber Landing gear x 1( red color and green color landing protection foam send at random)
- 5010 750KV motor x 4
- Hobbywing 40A 2-6S ESC x 4
- 3 axis Gimbal x 1
-TS832 and RC832 X1
- Pixhawk 2.4.8  32bit ARM Flight Controllerx 1
- shock absorber x 1
- Safety button and buzzer x 1( 2 kinds of design send at random)
- 4G TF card (IO firmware has written)  x1
- Neo-M8N Gps Module  x1
- Black Gps Holder x1
- Power Module x1
- Pixhawk OSD OLED Displayx1
- I2C Splitter Expand Module without x1
- PPM Module without shell  x1
- 5v/12v PDB x1
- battery belt x 2
- alarm x 1
- silicone wire x 1m
- 1245 propeller x 4 pair (the color send at random ,for ZD550 frame )
 
 
 
or
 
 
 
 
- Flysky i6 with ia10b receiver x1
-ZD680 Carbon Fiber Quadcopter frame kits x 1
- Carbon fiber Landing gear x 1( red color and green color landing protection foam send at random)
- 5010 750KV motor x 4
- Hobbywing 40A 2-6S ESC x 4
- 3 axis Gimbal x 1
-TS832 and RC832 X1
- Pixhawk 2.4.8  32bit ARM Flight Controllerx 1
- shock absorber x 1
- Safety button and buzzer x 1( 2 kinds of design send at random)
- 4G TF card (IO firmware has written)  x1
- Neo-M8N Gps Module  x1
- Black Gps Holder x1
- Power Module x1
- Pixhawk OSD OLED Displayx1
- I2C Splitter Expand Module without x1
- PPM Module without shell  x1
- 5v/12v PDB x1
- battery belt x 2
- alarm x 1
- silicone wire x 1m
-1555 Carbon Fiber Propeller X 2 Pairs for ZD680 frame
 






 
 


View full details

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)