Overview
The Ovonic Rebel 2.0 5S LiPo battery pack is designed for 5 to 6 inch FPV drone builds that use an XT60 power connector. Each pack is rated at 1300mAh capacity with an 18.5V (5S1P) configuration and a 130C discharge rate.
Key Features
- Rated capacity: 1300mAh
- 5S1P configuration, 18.5V nominal
- 130C discharge rate; 260C max burst discharge rate
- XT60 discharge plug and JST-XH balance connector (JST-XHR-6P)
- 12# AWG battery lead (as labeled)
Specifications
| Brand | Ovonic |
| Series | Rebel 2.0 |
| Chemistry | Li-polymer |
| Configuration | 5S1P |
| Voltage | 18.5V |
| Capacity | 1300mAh |
| Energy | 24.05Wh |
| Discharge Rate | 130C |
| Max Burst Discharge Rate | 260C |
| Discharge Plug | XT60 Plug |
| Charge / Balance Plug | JST-XH (JST-XHR-6P) |
| Wire | 12# AWG |
| Net Weight (dev.20g) | 190g per pack (0.42 lb) |
| Size (as labeled) | 76 x 37 x 38 mm (2.99 x 1.49 x 1.5 inches) |
| Length (dev.5mm) | 38mm |
| Width (dev.2mm) | 37mm |
| Height (dev.2mm) | 76mm |
What's Included
- 18.5V 130C 1300mAh LiPo Battery x2
- Packaging box x1
- Brand stickers x2
- User manual x1
Usage Notes
- For an RC battery, compatibility depends on matching voltage and connector type.
- Stop charging immediately when any cell reaches 4.2V (normal cell voltage range: 3.7V to 4.2V).
- Before use, check the battery surface condition and confirm the voltage is normal.
- If a new battery does not hold a full charge or loses charge quickly, use a balance charger and perform several charge/discharge cycles.
For product questions or order support, contact [email protected] or visit https://rcdrone.top/.
Details

Built for 5–6 inch FPV drones, each 5S 1300mAh pack uses an XT60 lead with JST-XH balance plug, and the graphic lists size and weight for fit checks.


Box contents include two 18.5V 5S 1300mAh packs plus the packaging box, brand stickers, and the user manual.

A compact 5S pack sized for freestyle builds, with the XT60 discharge connector and balance lead ready for common FPV power setups.
Related Collections
