• Rocket-RC Supersonic V2 waterproof brushless ESC with cooling fan, power leads and switch
  • Front label close-up of Rocket-RC waterproof ESC with cooling fan and 3–6S LiPo marking
  • Rocket-RC ESC shown with three color-marked motor connection wires and power switch
  • Top close-up of ESC cooling fan, capacitors, motor terminals and signal wire
  • Underside of Rocket-RC ESC housing with molded branding and compliance symbols
  • Angled side view of Rocket-RC waterproof ESC housing with cooling fan and wiring
  • Close-up of yellow high-current power connectors on red and black ESC battery leads
  • Rocket-RC ESC dimensions diagram showing 57.5 by 45 by 37 mm housing size
  • Three color-marked motor connection wires with gold bullet connectors
  • Rocket-RC V2 brushless power system retail box with 140 by 85 by 52 mm dimensions
  • Front-top view of Rocket-RC ESC with 160A cooling fan, capacitors and motor terminals
1 11

Rocket-RC Supersonic V2 130A/160A Waterproof Brushless ESC for 1/7 and 1/8 RC Cars

Rocket-RC Supersonic V2 130A/160A Waterproof Brushless ESC for 1/7 and 1/8 RC Cars

Rocket-RC

$82.00 USD
$82.00 USD
セール 売り切れ
税込。 配送料はチェックアウト時に計算されます。
Options
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
詳細を表示する

Overview

The Rocket-RC Supersonic V2 waterproof brushless ESC is available in 130A and 160A versions for 1/8 RC cars, with the 160A version also suitable for 1/7 RC cars. This sensorless ESC features an IP67 waterproof and dustproof design, switchable 6.0V/7.4V/8.4V BEC output, and ESC and motor overheat protection.

Key Features

  • IP67 waterproof and dustproof construction.
  • Infineon MOSFETs and Ruby capacitors.
  • Switchable Super BEC output: 6.0V, 7.4V, or 8.4V at 6A.
  • ESC and motor overheat protection.
  • Low-voltage protection with audible prompt.
  • Six selectable start levels and adjustable throttle travel.
  • Automatic shutdown after 5 minutes without operation.
  • Removable, replaceable 30 x 30 x 10 mm high-performance cooling fan.
  • Aluminum housing and integrated heat sink.
  • Electronic switch, receiver connection lead, ZH1.27 motor overheat-protection connector, and gold motor connectors.

For product configuration or compatibility assistance, contact rcdrone.top.

Specifications

Model Supersonic V2 130A Supersonic V2 160A
Continuous / Burst Current 130A / 860A 160A / 1080A
Suitable RC Car Scale 1/8 1/8 and 1/7
Motor Type Sensorless brushless motor
Battery 3-6 cells LiPo / 9-18 cells NiMH
BEC Output 6.0V / 7.4V / 8.4V, 6A switchable
Resistance 0.00035 ohm 0.00028 ohm
Dimensions 57.5 x 45 x 37 mm 57.5 x 45 x 37 mm
Weight 126 g 150 g

Motor Recommendations

Battery Configuration Supersonic V2 130A Supersonic V2 160A
4S LiPo / 12-cell NiMH, on-road 40XX-size or smaller, KV < 3000 42XX-size or smaller, KV < 3000
4S LiPo / 12-cell NiMH, off-road / buggy / monster 40XX-size or smaller, KV < 2500 42XX-size or smaller, KV < 2500
6S LiPo / 18-cell NiMH, on-road 40XX-size or smaller, KV < 2500 42XX-size or smaller, KV < 2500
6S LiPo / 18-cell NiMH, off-road / buggy / monster 40XX-size or smaller, KV < 2000 42XX-size or smaller, KV < 2000

Available Options

  • 130A ESC with single XT60 connector
  • 160A ESC with dual XT60 connectors
  • 160A ESC with dual XT90 connectors

Remove the cooling fan before using the ESC in water. Clean and dry the unit after use to help prevent connector corrosion.

Details

Rocket-RC Supersonic V2 160A waterproof brushless ESC with cooling fan and motor connectorsSupersonic V2 160A ESC with IP67 waterproof housing, cooling fan, and heavy-gauge battery lead

IP67 waterproof and dustproof construction helps protect the ESC in wet, demanding RC driving conditions; remove the cooling fan before water use.

Supersonic V1 and V2 ESC comparison chart highlighting MOSFET, capacitor, BEC, and protection upgradesExploded view of Supersonic V2 ESC with removable cooling fan, Ruby capacitors, heat sink, and gold connectors

A removable 30 x 30 x 10 mm cooling fan, aluminum heat sink, Ruby capacitors, and gold connectors support serviceable high-power performance.

Supersonic V2 ESC wiring leads with XT60 or XT90 battery plugs, receiver lead, switch, and motor sensor port

Connection leads include battery plugs, gold motor connectors, a receiver lead, electronic switch, and a ZH1.27 motor overheat-protection port.

Supersonic V2 130A and 160A ESC specification chart with current ratings, battery range, BEC, and dimensions

Related Collections