MAD 1005 IPE 90KV Drone Motor (12S) – 10.1kg Max Thrust, 320g, 32in Prop Setup, 21 Pole Pairs
MAD 1005 IPE 90KV Drone Motor (12S) – 10.1kg Max Thrust, 320g, 32in Prop Setup, 21 Pole Pairs
MAD
픽업 사용 가능 여부를 로드할 수 없습니다.
Overview
The MAD 1005 IPE is a 90KV drone motor designed for stable, long-endurance multi-rotor builds and medium-to-heavy single-rotor lift setups, including use with 32-inch carbon fiber propellers. It is specified for sustained thrust in the 3.5~4.5kg range (also shown as 3.5~4.5kgf recommended hover thrust on the performance sheet), with a maximum thrust rating of 10.1kg (10.1kgf on the performance sheet) on 12S.
Key Features
- Max thrust: 10.1kg (10.1kgf on the performance sheet)
- Sustained thrust: 3.5~4.5kg (3.5~4.5kgf recommended hover thrust on the performance sheet)
- Support voltage: 12S
- Motor weight: 320g
- Efficiency: 12g/W
- Electrical efficiency: >82% (performance sheet)
- Verified service life: over 1000 hours
- Recommended ESC (listed): FOC 60A 12S; MAD AMPX 40A (5-14S)
Specifications
| Motor model | MAD1005 IPE |
| KV (RPM/V) | 90KV |
| Nominal voltage | 12S |
| Sustained thrust | 3.5~4.5kg |
| Recommended hover thrust (performance sheet) | 3.5~4.5kgf |
| Maximum thrust | 10.1kg |
| Maximum thrust (performance sheet) | 10.1kgf |
| Motor weight | 320g |
| No-load current | 0.9A / 30V |
| Maximum current | 34A |
| Internal resistance | 144mΩ |
| Maximum power | 1636W |
| Maximum torque | 3.9 Nm |
| Number of pole pairs | 21 |
| Stator | TAIWAN / Anticorrosive |
| Varnished wire degree | 180°C |
| Magnet degree | 150°C |
| Motor size | D:107×22.5mm |
| Degree of protection | Rain protection |
| Centrifugal heat dissipation | Independent |
| Rotor balance | ≤5 mg |
| Motor balance | ≤10 mg |
| Shaft diameter | IN: 17mm |
| Motor mounting holes | D:32 M4×4 |
| Propeller mounting holes | D:20 M3×4, D:23 M4x4 |
| Cable length | 100 mm 16# Awg (Black) silicone |
| Bearing | EZO 6803ZZ*2; EZO 6706-2RU |
| Disruptive test | 500 V |
| Recommended propellers (performance sheet) | 30x10; CB2 PRO 30x10.5; 32x9.6; CB2 PRO 32x11 |
| UAV take-off weight (performance sheet) | 12S-32"/ 14kg-Quadcopter; 21kg-Hexacopter; 28kg-Octocopter |
| Single rotor take-off weight (performance sheet) | 3.5kg ~ 4.5kg |
| Product boxed weight (performance sheet) | 691 g (200 x 150 x 70mm) |
Drawing and Mounting Hole Dimensions
| Outer diameter (drawing) | 107 |
| Body thickness (drawing) | 24 |
| Step/offset dimension (drawing) | 4.3 |
| Cable length shown (drawing) | 100 |
| Prop mounting hole patterns shown (drawing) | Ø20-M3*4; Ø23-M4*4 |
| Motor mounting hole pattern shown (drawing) | Ø32-M4*4 |
| Additional features shown (drawing) | Ø20-Ø3.2×4; Ø6; 14.5; 10; 11.6; 3; 1 |
Applications
- Industrial UAV builds
- Drones carrying medium-to-heavy payloads
- Long-endurance multirotor platforms requiring stable thrust and durability
For ESC/propeller matching and mounting compatibility checks, contact support@rcdrone.top or visit https://rcdrone.top/.
Details
MAD 1005 IPE 90KV motor dimensions and bolt-hole patterns are laid out for planning mounts, spacing, and shaft clearance.
MAD 1005 IPE 90KV motor specs include an efficiency curve, key performance figures, and a clearly marked 12S maximum setup.
MAD 1005 IPE 90KV motor test data lists throttle-based voltage, current draw, RPM, thrust, and efficiency for a 12S setup.
MAD 1005 IPE 90KV motor test data lists key figures such as voltage, current draw, RPM, thrust and efficiency across throttle settings.
