4.9-6.0GHz 10W FPV Video Transmitter (VTX), 80CH, IRC Tramp, PIT/25mW/200mW/5W/10W, 2-8S

Overview

This 4.9-6.0GHz FPV Video Transmitter (VTX) provides up to 10W output power with PIT/25mW/200mW/5W/10W selectable levels. It supports IRC Tramp protocol for OSD parameter adjustment, uses an LED digital display for band/channel/power indication, and accepts a wide DC 7-36V (2-8S) input for FPV drone racing and aerial photography builds.

Key Features

• Max output power: 10W; adjustable power: PIT / 25mW / 200mW / 5W / 10W
• Operating frequency: 4900~6000MHz; 80-CH
• CNC integrated upper/lower shell covering structure with built-in cooling fan for heat dissipation
• LED digital display for Frequency Band / Channel / Power level
• Display indicators: letter indicates frequency band; number 1-8 indicates channel; number 0-4 indicates power level (modes: b = frequency band, c = channel, p = power level)
• Dual-button control:
  • Parameter Setting Button: band selection (cycles through 10 frequency bands), power setting (cycles through 5 levels: 0-4), channel selection (cycles through 8 channels: 1-8)
  • Band/Group/Power Selection Button: short press to switch modes between b (Frequency Band), c (Channel), p (power level)
• Supports 2-8S (7-36V) wide voltage input
• Mounting hole pattern: 20 x 20mm, M2 holes

For wiring or configuration support, contact https://rcdrone.top/ or email support@rcdrone.top.

Note: comply with local regulations and install the antenna before use.

Specifications

Wiring (Labels Shown)

• Power: 7-36V, GND
• Control/IO labels: IRC, 5V OUT, VTX, VID, RX, BAT, GND
• RF output label: RF OUT

What’s Included

• 1 x 5.8G 10W VTX
• 1 x 4P single-ended tinned connection cable
• 1 x PH2.0 single-ended tinned connection cable
• 1 x Straight SMA male (plug) to straight SMA female (jack) adapter cable (RG316), total length 100mm

Applications

• Aerial photography FPV builds requiring 4900~6000MHz analog video transmission
• FPV drone racing setups needing IRC Tramp control and selectable PIT-to-10W power levels

Details

Built for long-range analog FPV setups, the transmitter delivers up to 10W output power with a compact, fan-cooled body.

Quickly tailor output power from PIT to 10W, with IRC Tramp support for OSD control and wide 2–8S voltage input.

An LED digital display keeps band, channel, and power level easy to verify at a glance during tuning and field use.

Simple button controls handle band/channel/power changes, and the wiring layout helps speed up clean installs.

Detailed specs and measurements confirm fitment for 20×20 stacks and space-limited FPV builds.