ATOMRC 2.4G ELRS FPV Receiver, ESP8285N08 WiFi, CRSF/SBUS, 5-9V for Fixed Wing & FPV Models

Overview

The ATOMRC 2.4G ELRS FPV receiver is designed for fixed wing, racing drone, and other FPV models. It is described as offering higher sensitivity and stronger anti-interference ability to help reduce the probability of interference from mobile phone base stations and maintain better stability in flight.

Key Features

• ExpressLRS 2.4G V3.0 (text shown)
• Low latency (text shown)
• High refresh rate (text shown)
• CRSF and SBUS switchable
• Onboard parts and interfaces labeled: ESP8285N08 microcontroller, IPEX MHF, BOOT, LED, RF Chip SX1281IMLTRT, Power Amplifier RFX2401C
• Pad labels: RX, TX, 5V, GND

Specifications

Wiring & Configuration Notes

• Wiring diagram shows: FC TX to RX, FC RX to TX, 5V to 5V, GND to GND.
• Betaflight Configurator note: in the Ports interface, set UART1 as the Serial digital receiver communication interface.
• CRSF receiver setting note: set Receiver Mode to “Serial Receiver (via UART)”, and set the Serial Receiver Provider to CRSF.
• Note shown: “Receivers suitable for this setting are: TBS Nano/ELRS”.

What’s Included

• Receiver
• Antenna
• Insulation tube
• 4-pin 2.54 DuPont cable

For setup questions or order support, contact support@rcdrone.top or visit https://rcdrone.top/.

Details