Axisflying ARGUS PRO 100A ESC, 4–8S, BLHeli32/Bluejay (32‑bit/8‑bit), Aluminum Heat Sink, 30.5*30.5mm

Overview

The Axisflying ARGUS PRO 100A ESC is a high-current ESC for multirotor builds. It supports 4 - 8S Lipo and uses heat dissipation aluminum parts for protection and stable, precise, fast throttle response. Two variants are available: 32BIT and 8BIT, with firmware names B-X-40-Bluejay / BLHeli32. Telemetry is supported on the 32BIT version (not supported on 8BIT).

Key Features

• Continuous current: 100A; Burst current: 110A
• Input Voltage: 4 - 8S Lipo
• Telemetry: 32BIT supported / 8BIT Not supported
• Firmware name: B-X-40-Bluejay / BLHeli32
• Temperature protection: Supported
• BEC: Not supported
• Heat dissipation aluminum parts
• Four motor outputs (M1–M4); install hole distance: 30.5*30.5mm
• Compact body: 57*56*7mm; Weight: 41±2g
• Amperage Meter: 200

Specifications

What’s Included

• Flight Controller Connection Cable ×1
• M3×30 Screws ×4
• M3 Nylon Nuts ×4
• Capacitor ×1
• Vibration Damping Grommets ×8 (ESC ×4, FC ×4)
• XT90 Power Cable ×1
• Receiver Connection Cable ×1
• HD VTX Connection Cable ×1
• Analog Camera Connection Cable ×1
• Analog VTX Cable ×1

Details

Axisflying Argus Pro 100A ESC supports 4-8S LiPo, 100A continuous current, 32BIT firmware, telemetry, and temperature protection. Includes connection cables, screws, nuts, capacitor, grommets, and power cables for setup.

Axisflying ARGUS PRO 100A ESC: 32BIT telemetry, 100A continuous/110A burst current, 4-8S LiPo input, temp protection, 57×56×7mm, 41±2g. Compatible with B-X-40-Bluejay and BLHeli32 firmware.

ARGUS PRO 100A ESC offers 32BIT and 8BIT versions, supports 4-8S LiPo, includes M1-M4 motor connections, VBAT, GND, CUR, TELE, NC pins, front orientation marking, and clearly labeled battery input and motor outputs.

Dual-side pin layouts with labeled connections. Includes flight controller, power, receiver, VTX, camera cables, screws, nuts, capacitor, and vibration dampers for secure setup.