Axisflying Argus PRO Plug and Play STACK — F7 FC + 55A/65A BLHeli_32 ESC, IP54 aluminum cover, 30.5×30.5mm, dual BEC 5V/9V

Overview

Axisflying Argus PRO Plug and Play STACK combines an F7 flight controller with a 55A or 65A BLHeli_32 ESC in a CNC full aluminum cover for IP54 dustproof and splashproof protection. The STACK design focuses on direct plug-in peripherals and X8 motor output support, enabling rapid integration for HD and analog FPV builds.

Key Features

• IP54 dustproof and splashproof enclosure; do not immerse or use underwater.
• CNC full aluminum cover enlarges radiating surface for rapid heat dissipation and stable operation.
• High-quality, large-size MOSFETs with low internal resistance; improved thermal performance.
• Plug-and-play peripheral connectivity: HD Air units, analog cameras, GPS, RGB LED strip, beeper.
• Integrated dual BEC: 5V @2A and 9V @2A; supports direct connection to DJI O3 Air Unit.
• F7 FC with up to 8 motor outputs for X8 configurations.
• Status indicator LEDs for quick FC state checking.
• FC supports INAV; firmware shown as AXISFLYING F7 Pro (BF, INAV).
• ESC telemetry and ammeter support.
• USB Type‑C and BOOT button on the FC.

Specifications

Physical (Stack)

ESC (Argus PRO 55A/65A)

Flight Controller (Argus PRO F7)

I/O and Connectivity

• HD systems: DJI O3 Air Unit, Avatar HD, Vista/Link supported via direct connection.
• Analog camera and VTX supported.
• GPS supported; connect SCL/SDA only when the GPS includes a magnetometer.
• ESC sensor/telemetry supported.
• RGB LED strip and beeper supported.
• SBUS (R2) only for DJI FPV controller; disconnect SBUS (R2) if not using DJI FPV controller.
• ELRS receivers recommended; when using DJI Sky, some ELRS receivers may not be recognized—disconnect the SBUS signal of the Sky cable from the FC if this occurs.

Applications

• FPV multirotor builds requiring a 30.5 × 30.5 mm STACK footprint.
• X8 platform builds needing up to eight motor outputs.
• HD (DJI O3/Avatar/Vista) and analog FPV systems.

Notes

• For ESC protection against transient voltage spikes on power‑up, it is strongly recommended to use the capacitor included in the package.

Details

Argus Pro 55/65A stack flight controller with Type-C boot button, GPS, DJI O3 Air Unit, Avatar HD, VistaLink compatibility. Includes wiring diagrams for ELRS receivers, SBUS, SCL/SDA, and analog VTX connections. Notes on proper interface definition and soldering precautions.

55/65A ESC with 3-6S LiPo, BLHeli_32, telemetry, ammeter; F7 Pro FC features 42688 gyro, barometer, OSD, 6 UART, 16M flash. 30.5x30.5mm M3 mount. (39 words)