DarwinFPV BabyApe II FPV Drone RTF Kit (Analog 4S) w/ TX12 Mark II ELRS, VR009 Goggles & Charger
DarwinFPV BabyApe II FPV Drone RTF Kit (Analog 4S) w/ TX12 Mark II ELRS, VR009 Goggles & Charger
DarwinFPV
Couldn't load pickup availability
Overview
DarwinFPV BabyApe II FPV Drone RTF is a ready-to-fly analog FPV kit designed to help beginners get started without needing to match parts separately. The kit combines the BabyApe II 4S analog FPV drone, RadioMaster TX12 Mark II transmitter, VR009 5.8G 40CH 3-inch FPV goggles/monitor, 4S 850mAh batteries, and a balance charger.
Compared with the first-generation Baby Ape, BabyApe II uses a new power system and more reliable manufacturing technology. With a 4S 850mAh battery, hovering time is up to 13 minutes, furthest distance is 1.5 km, and top speed is 92 km/h.
Key Features
- 1504 motors with 3.5-inch propellers for strong power and faster response
- Glue-pouring (potting) protection for the camera and stack to reduce risk of damage from metal particles, fine sand, gravel, weeds, or dew
- Buzzer and additional LED lights to help with battery over-discharge alerts and locating the drone
- IP54 rating (as labeled)
- RadioMaster TX12 Mark II transmitter with built-in ExpressLRS module, Hall gimbals, and up to 2 km remote control range
- TX12 Mark II supports USB simulator (as labeled)
- VR009 5.8G dual-antenna 40CH 3-inch FPV goggles/monitor with dual-antenna reception and delay as low as 10 ms
- Hotrc A400 balance charger with six protections: overcharge, short circuit, overvoltage, temperature, output overcurrent, input overcurrent (as labeled)
Specifications
BabyApe II Analog FPV Drone (4S)
| Model | Baby Ape II FPV Drone |
| Wheelbase | 156 mm |
| Dimensions | 126 mm x 150 mm x 50 mm |
| Flight Controller | F411 MPU6500 AT7456E |
| ESC | Bluejay 48KHz 3-6S 30A |
| Camera | DarwinFPV “Cement” waterproof camera |
| VTX | 5.8G 600 mW |
| Motor | 1504-3600KV (4S version) |
| Propeller | HQProp T3.5x2x3GR-PC |
| Recommended Battery | LiPo 4S 850 mAh |
| Hovering Time | 13 mins (4S 850 mAh battery) |
| Furthest Distance | 1.5 km |
| Top Speed | 92 km/h |
RadioMaster TX12 Mark II Transmitter
| Size | 170 x 159 x 108 mm |
| Weight | 363 g |
| Frequency | 2.400GHZ-2.480GHZ |
| RF Chip | ExpressLRS |
| Voltage Range | 6.6-8.4 V DC |
| Channels | Up to 16 (depending on the receiver) |
| Display | 128 x 64 monochrome LCD |
| Gimbal | High precision Hall gimbals |
| External Module | JR / FrSKY / Crossfire compatible |
| SD Card | Included |
Darwin ELRS 2.4G Receiver
| Weight | 2.9 g ± 0.2 g |
| Size | 14.2 mm x 22.0 mm x 4 mm |
| Frequency | 2.4 GHz ISM |
| Refresh Rate | 25 Hz-500 Hz |
| RF Power | 100 mW |
| Voltage | 5 V |
| Protocol | CRSF |
| Firmware | BETAFPV_Nano_2400_RX |
VR009 5.8G Dual Antenna 40CH 3-inch Monitor (FPV Goggles)
| Display Ratio | 16:9 |
| Screen Size | 3.0 inch |
| Resolution | 480 x 320 |
| Battery | 3.7 V / 1200 mAh |
| Usage Time | 2.5 h |
4S 850mAh LiPo Battery
| Voltage | 15.2 V |
| Capacity | 850 mAh |
| Discharge Rate | 120C |
| Charge Rate | 1C to 5C |
| Discharge Connector | XT30 |
| Net Weight | 89 g |
| Size (L x W x H) | 63 x 30 x 27 mm |
Hotrc A400 Balance Charger
| Weight | 130 g |
| Size | 98 x 60 x 28 mm |
| Battery Type | 4S / 3S LiPo (11.1 V / 14.8 V) |
| Max Charge Current | 3000 mAh |
| Balanced Current | 300 mAh/cell |
| Max Charge Power | 40 W |
| Charge Stop Voltage | 4.2 V ± 0.02 V |
| Working Temperature | 0-40°C |
What’s Included
- 1 x BabyApe II Analog FPV Drone
- 1 x RadioMaster TX12 Mark II transmitter
- 1 x VR009 5.8G Dual Antenna 40CH 3-inch FPV goggles/monitor
- 2 x DarwinFPV 4S 850 mAh 15.2 V brushless battery
- 1 x Hotrc A400 balance charger
- 4 x HQProp T3.5x2x3GR-PC propeller (2 CW + 2 CCW)
- 2 x Battery strap (10 x 170 mm)
- 2 x EVA pad (thickness: 10 mm)
- 1 x Spare screws pack
- 1 x Sticker
- 1 x Manual
Applications
- Beginner-friendly analog FPV practice and training
- Everyday FPV freestyle practice with a compact 4S setup
For setup questions, parts support, or after-sales service, contact support@rcdrone.top or visit https://rcdrone.top/.
Details
Everything needed to start flying comes bundled together: the BabyApe II analog quad, TX12 Mark II transmitter, VR009 FPV goggles, batteries, and a balance charger.
Glue-pouring protection on the camera and stack helps reduce damage risk from fine sand, gravel, weeds, and light moisture during outdoor flights.
The included RadioMaster TX12 Mark II radio features Hall gimbals and a built-in ExpressLRS module for a solid beginner-to-advanced control setup.
VR009 5.8G 40CH goggles combine a 3-inch screen with dual-antenna reception for simple, portable analog FPV viewing.
Charging is handled by the included Hotrc A400 balance charger, designed with multiple built-in protections for everyday LiPo use.
Related Collections
