Axisflying Cineon C35 V3 3.5-Inch FPV Drone Frame Cinewhoop, Cinematic Freestyle, DJI O4/O4 Pro Compatible

Overview

The Axisflying Cineon C35 V3 is a 3.5-inch FPV Drone Frame cinewhoop engineered for cinematic freestyle and reliable integration with DJI O4/O4 Pro. The C35V3 features a 160mm wheelbase, 3.5mm T700 carbon plates, 36mm electronics layer height and 20mm camera spacing. It accepts up to 3.5 inch propellers and uses M2 hardware throughout for stack, VTX and motor mounting. Overall weight is 206 ± 5g including printed parts.

Key Features

DJI O4/O4 Pro camera plate options

Two front camera plate styles: O4 Pro CNC camera plates and O4 Lite injection molded camera plates.

Optimized cinewhoop structure

Protected duct design with robust carbon core for stable cinematic flight and freestyle agility.

Recommended configuration

• Motor: Axisflying C206–1960KV
• Battery: 1300–2200mah ( 6 S )
• Stack: Axisflying 40A F745 AIO
• Propellers: HQ DT90 MMX4

Color options

Inky black, Sunset Orange, Celestial Blue, Orchid Purple.

Specifications

What’s Included

Frame kit as shown, including ducts, carbon frame plates, camera mounting brackets (O4 Pro CNC and O4 Lite injection molded options), battery straps, XT60 and antenna mounts, GPS printed parts, standoffs, O-rings, and complete M2/M3 hardware set.

Installation Instructions

Step 1

M3*14 Pass through the top frame, middle frame, and bottom frame to secure the front body and camera aluminum parts. M3*12 Pass through the bottom frame, middle frame, and top frame to secure the left and right body. M3*6 Pass through the bottom frame to secure the M3*23 aluminum standoffs. M3*10 Pass through the bottom and top frame to secure the rear body.

Step 2

M2*12 Pass through the front of the camera mounting bracket to secure the GPS printed parts and M2*16 aluminum standoffs. M2*6 Pass through the rear of the camera mounting bracket to secure the GPS printed parts and M2*25 aluminum standoffs. M3*6 countersunk Secure the rear of the camera mounting bracket to the carbon plate. Set screws 4*4 M3 Pass through the sides of the camera mounting bracket to secure the camera aluminum parts together. M2*10 countersunk Pass through the front of the camera mounting bracket through the carbon plate to secure it to the camera aluminum parts.

Step 3

M3*6 Pass through the front of the camera mounting bracket through the carbon plate to secure it to the camera aluminum parts. M3*6 countersunk Secure the carbon plate to the M3*23 aluminum standoffs and the rear of the camera mounting bracket to the carbon plate. M2.5*8 countersunk Secure the XT60 connector to the carbon plate at the rear. M2*6 countersunk Secure the carbon plate to the frame. Add an O-ring between the antenna and the top frame for shock absorption.

Applications

Cinematic indoor/outdoor FPV shooting, safe proximity flights, freestyle lines with prop guards, and DJI O4-based builds.

Details

C35 V3 Frame has a cine whoop design, 160mm wheelbase, 3.5mm T700 carbon plate, 206±5g weight. Suggested parts: C206-1960KV motors, 1300-2200mAh battery, 40A F745 AIO stack, HQ DT90 MMX4 props.

Cineon C35 FPV Drone components include frame parts, screws, motors, propellers, and accessories. Various sizes of bolts and nuts are labeled for assembly. Includes safety straps and electronic parts. Wishing you a safe and enjoyable flight.