DarwinFPV BabyApe III Mini RTF FPV Drone Kit (2-inch) ELRS 2.4G, TX8 Radio, Goggles Options
DarwinFPV BabyApe III Mini RTF FPV Drone Kit (2-inch) ELRS 2.4G, TX8 Radio, Goggles Options
DarwinFPV
Regular price
$284.99 USD
Regular price
Sale price
$284.99 USD
Unit price
per
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
Overview
DarwinFPV BabyApe III Mini RTF is a compact FPV drone kit designed to reduce the cost and complexity of getting started with freestyle FPV. The BabyApe III series includes 2-inch Mini, 3-inch Standard, and 3.5-inch Pro models, all built around a lightweight design under 250 g.
Key Features
- Compact and portable: manufacturer states the entire drone weighs under 100 g; suitable for flying in a variety of everyday outdoor spaces where permitted.
- Beginner-friendly tune: Bling 1103 motors paired with Gemfan 2023 freestyle propellers, optimized for smoother handling and reduced prop stalls.
- Carbon fiber structure: one-piece carbon fiber body; T300 grade carbon fiber is referenced, with a rubber paint coating on the carbon plate for a smoother surface finish.
- Battery roll cage protection: dedicated compartment helps keep the battery secure during crashes; fits 16–20 mm wide batteries. Battery balance plug is shown.
- Built-in ELRS: AIO with built-in ELRS 2.4G receiver.
- Multiple video options (varies by version): Analog VTX, Walksnail Avatar, DJI O4, and VTX-free options are presented.
- TX8 simulator support (as stated): ELRS TX8 remote controller supports a variety of popular simulators; built-in ELRS 2.4G 100 mW RF module; control range over 2 km.
For setup help or spare parts selection, contact support@rcdrone.top or visit https://rcdrone.top/.
Specifications
Airframe & power system
| Series weight class | Under 250 g (BabyApe III series statement) |
| Drone weight (Mini) | Under 100 g (manufacturer statement) |
| Motor | Bling 1103 |
| Propellers | Gemfan 2023 freestyle propellers |
| Frame/body material | One-piece carbon fiber body (T300 grade carbon fiber referenced) |
| Receiver | Built-in ELRS 2.4G receiver (AIO with built-in ELRS 2.4G receiver) |
| Battery fitment note | Roll cage fits 16–20 mm wide batteries; other sizes can be mounted externally; cable tie holes are pre-reserved on the base plate |
Video transmission options table (as presented)
| Video transmission type | Goggle end quality | Video recording quality | Transmission distance | Latency | Anti-interference capability |
|---|---|---|---|---|---|
| Analog VTX | 720 x 540 | / | 3–5 km | below 10 ms | weak |
| Walksnail Avatar HD Mini 1s Kit | 1080P/60fps | 1080P/60fps | 3–4 km | 22 ms | medium |
| dji o4 | 1080p/100fps | 4K/60fps | 10 km | 20 ms | strong |
| dji o4 Pro | 1080p/100fps | 4K/120fps | 15 km | 15 ms | super strong |
DJI O4 (when equipped; as stated)
| Module | DJI O4 Air Unit Module |
| FPV transmission image quality | 1080p/100fps |
| Ultra-clear shooting | 4K/60fps |
| Maximum VTX distance | 10 kilometers |
| Maximum transmission bitrate | 60 Mbps |
| Recording note | Ultra-wide-angle with no propeller visibility and zero vignetting (stated) |
TX8 radio (as stated)
| Radio | ELRS TX8 remote controller |
| RF module | Built-in ELRS 2.4G 100 mW |
| Control range | Over 2 km |
Goggles (as stated)
| Analog version | EV800DM 5.8G 3-inch goggles; dual antennas; 10 ms low latency |
| HD version | Dul N3 goggles |
What’s Included
BabyApe III Analog RTF (packing list shown)
- BabyApe III Analog + 2.4g
- 3InchFPV Goggles
- M3 Battery Balance Charger
- TX8 ELRS Transmitter
- ONELINK 3S 500mAh (2 batteries shown)
- Instruction Card
- 120*120mm Logo Sticker
BabyApe III Without O4 RTF (packing list shown)
- BabyApe III Without O4 + 2.4g
- M3 Battery Balance Charger
- TX8 ELRS Transmitter
- ONELINK 3S 500mAh (2 batteries shown)
- Instruction Card
- 120*120mm Logo Sticker
Applications
- Beginner FPV practice and simulator-based training (TX8 support stated)
- Light freestyle flying with a compact 2-inch class drone (Mini)
- Travel and camping flights where local rules allow
Details
