DarwinFPV Toruk15 15-Inch True-X FPV Drone Frame, Carbon Tube Arms, XT60 Series, 628mm Wheelbase
DarwinFPV Toruk15 15-Inch True-X FPV Drone Frame, Carbon Tube Arms, XT60 Series, 628mm Wheelbase
DarwinFPV
Couldn't load pickup availability
Overview
DarwinFPV Toruk15 is a 15-inch True-X FPV drone frame designed for long-range and heavy-lift builds, featuring reinforced carbon tube arms and a compact, low-profile layout for centralized weight distribution. The frame design is described as capable of withstanding 8 Beaufort scale winds (45 mph, Force 8).
Key Features
- True-X frame + reinforced carbon tubes: lighter and stiffer than standard carbon plates; described to withstand 8 Beaufort scale winds (45 mph, Force 8).
- Compact, flat structure: centralized weight distribution for more agile and easier flight handling.
- Pre-drilled mounting holes: supports flexible DIY electronics installation (multiple mounting patterns listed in Specifications).
- Series-connected XT60 power plugs: supports doubling voltage by using two standard batteries (e.g., two 6S packs for 12S setups).
- Hidden motor wire routing: motor wires can be routed inside the carbon tubes to help prevent propeller damage to wires and keep a clean layout.
- Accessory mounting: GPS module and GoPro mount slots are stated to be ready for installation.
Specifications
| Model | DarwinFPV Toruk15 Frame |
| Frame structure | True-X |
| Arm structure | Carbon fiber square tube |
| Wheelbase | 628mm |
| Dimensions | 496x496x110mm |
| Arm thickness | 22x20x248 (Carbon fiber square tube) |
| Top plate thickness | 2.5mm |
| Bottom plate thickness | 3mm |
| FC installation hole distance | 30.5x30.5mm |
| VTX installation hole distance | 20x20mm / 25.5x25.5mm / 30.5x30.5mm |
| Motor installation hole distance | 30x30mm (M4) |
| Camera mount size | 19-20mm |
| Stack internal installation height | 22mm |
| VTX internal installation height | 22mm |
| Compatible propellers | 15-16 inch |
| Standard TPU | 1) Antenna base mount 2) Camera base mount |
| Weight (including standard TPU parts) | 646.4g |
| Motor | DarwinFPV 4320 350KV |
| Compatible battery | 6S 10000mAh 60C XT60 x2 |
| Compatible ESC | Above 80A |
| Compatible Propeller | Gemfan1507-3/1608-3 |
| Recommended takeoff weight | 4000-8000g |
What’s Included
- DarwinFPV Toruk15 Frame
- M2*8 Black Hex Socket Round Head Screw, Grade 10.9
- M2*10 Black Hex Socket Round Head Screw, Grade 10.9
- M3*6 Black Hex Socket Round Head Screw, Grade 10.9
- M6*40 Black Hex Socket Round Head Screw, Grade 10.9
- M6 White Standard Thread Flange Anti-Loosening and Anti-Slip Nut (Metal Locking)
- M2 Black Hex Socket Iron Nut
- M2 black nylon hex nut
- M3*22*D5 Black Aluminum Post
- M4*22*D7 Nylon Double-Ended Standoff
- M2*4 Hex Socket Nylon Standoff
- Toruk 13/15-inch Black Mesh Silicone Mat
- Toruk 13/15 inch Black TPU Camera Mount
- X9 Black TPU Antenna Base
- Toruk 13/15 inch Black TPU Floor Mat
- Accessory pack: 2x100mm Nylon Cable Ties; Black thin straw (3mm diameter, 100mm length); Yellow rubber cap (3mm diameter)
Applications
- 15–16 inch propeller long-range FPV builds
- Heavy-lift builds within the stated recommended takeoff weight range (4000–8000g)
- Builds requiring XT60 series battery connection (two packs) and support for common FC/VTX mounting patterns
For build compatibility questions (motors, stacks, ESC selection, and battery wiring), contact support@rcdrone.top or visit https://rcdrone.top/.
Details
Reinforced carbon tube arms pair with a True‑X layout for a rigid, heavy‑lift long‑range build.
A compact, flat center section keeps components close to the CG for more predictable handling.
Multiple mounting points help fit common FC/VTX stacks and accessories without custom drilling.
Dual XT60 plugs support series battery setups when higher voltage is needed.
Motor wires route inside the arms to reduce clutter and help prevent propeller damage.
GPS and action-camera mounting points are integrated into the top plate for cleaner installs.
Related Collections
