Specifications
-
Weight
-
DJI Video Transmitter: Approx. 350 g (excluding antennas)
DJI High-Bright Remote Monitor: Approx. 727 g (excluding antennas)
DJI Video Receiver: Approx. 350 g (excluding antennas)
-
Dimensions
-
DJI Video Transmitter: 127×87×26 mm (L×W×H, excluding antennas)
DJI High-Bright Remote Monitor: 213×135×51 mm (L×W×H, excluding antennas)
DJI Video Receiver: 127×87×26 mm (L×W×H, excluding antennas)
-
Operating Frequency
-
When using the DJI Video Transmitter with the DJI High-Bright Remote Monitor:
Non-DFS Frequency Band:
2.400-2.484 GHz
5.150-5.250 GHz
5.725-5.850 GHz
DFS Frequency Band:
5.250-5.350 GHz
5.470-5.600 GHz
5.650-5.725 GHz
When using the DJI Video Transmitter with the DJI Video Receiver:
Non-DFS Frequency Band:
2.4000-2.4835 GHz
5.150-5.250 GHz
5.725-5.850 GHz
DFS Frequency Band:
5.250-5.350 GHz
5.470-5.725 GHz
In some countries and regions, the 5.1/5.2/5.8 GHz frequencies are prohibited, or the 5.1/5.2 GHz frequencies are only allowed for indoor use. Check local laws and regulations for more information. 5.600-5.650 GHz is not used.
-
Transmitter Power (EIRP)
-
When using the DJI Video Transmitter with the DJI High-Bright Remote Monitor:
2.400-2.484 GHz:
<33 dBm (FCC)
<20 dBm (SRRC/CE/MIC)
5.150-5.250 GHz:
<23 dBm (FCC/SRRC/MIC)
5.250-5.350 GHz:
<30 dBm (FCC)
<23 dBm (SRRC/MIC)
5.470-5.600 GHz, 5.650-5.725 GHz:
<30 dBm (FCC)
<23 dBm (CE/MIC)
5.725-5.850 GHz:
<33 dBm (FCC/SRRC)
<14 dBm (CE)
When using the DJI Video Transmitter with the DJI Video Receiver:
2.4000-2.4835 GHz:
<33 dBm (FCC)
<20 dBm (SRRC/CE/MIC)
5.725-5.850 GHz:
<33 dBm (FCC)
<14 dBm (CE)
<23 dBm (SRRC)
-
Max Bandwidth
-
40 MHz
-
Max Bitrate
-
40 Mbps
-
Power Consumption
-
DJI Video Transmitter: 11 W
DJI Video Receiver: 9 W
-
Power Supply Voltage
-
6 to 18 V
-
Output Voltage
-
Power output port: 6 to 18 V
-
Operating Time
-
DJI Video Transmitter: 3 hours 40 minutes
Measured at room temperature (25°C/77°F) with a fully charged WB37 Intelligent Battery.
DJI High-Bright Remote Monitor: 2 hours
Measured at room temperature (25°C/77°F) with a fully charged WB37 Intelligent Battery.
DJI Video Receiver: 3 hours 50 minutes
Tested at room temperature (25°C/77°F) when powered by a fully charged WB37 Intelligent Battery and used with the DJI Video Transmitter.
-
Input Video Format
-
DJI Video Transmitter:
1080p: 23.98/24/25/29.97/30/50/59.94/60fps
720p: 50/59.94/60fps
-
Output Video Format
-
When using the DJI Video Transmitter with the DJI High-Bright Remote Monitor:
1080p: 23.98/24/25/29.97/30/50/59.94/60fps
720p: 50/59.94/60fps
Only the DJI Video Transmitter supports video input at fractional frame rates and loop-out. The DJI High-Bright Remote Monitor and DJI Remote Monitor Expansion Plate do not support video display or output at fractional frame rates.
When using the DJI Video Transmitter with the DJI Video Receiver:
1080p: 23.98/24/25/29.97/30/50/59.94/60fps
720p: 50/59.94/60fps
When using the Ronin 4D Video Transmitter with the DJI Video Receiver:
1080p: 24/25/30/50/60fps
-
Input Audio Format
-
SDI embedded, HDMI embedded
-
Output Audio Format
-
PCM
-
Video Transmission System
-
O3 Pro
-
Video Transmission Latency
-
70 ms
Measured when shooting 1080p/60fps video.
-
Video Coding Format
-
H.264
-
Max Transmission Distance
-
6 km (FCC)
4 km (CE/SRRC/MIC)
Measured in open environments without obstructions or interference.
-
Operating Temperature
-
-10° to 45° C (14° to 113° F)
When using the WB37 Intelligent Battery, the recommended operating temperature is above 0° C (32° F). Take measures to keep the battery warm when using in temperatures below 0° C (32° F).
-
Mirror Control Mode Supported Camera Models
-
ZV1/A7 III/A7S III/A7M III/A7R III/A7R IV/A7 IV/FX3/A7S II/A6600/A6400 and all Sony cameras that support BRAVIA (HDMI control).
About this item
- 20,000ft 1080p/60fps Transmission - DJI Video Receiver adopts O3 Pro image transmission technology, providing a 20,000ft (6 km) range, 50Mbps bitrate, and 16-bit 48kHz real-time audio monitoring.
- Unlimited Number of Receivers - When using Broadcast mode, the DJI Video Receiver can support the use of an unlimited number of monitoring devices.
- Seamless Auto Frequency Hopping - O3 Pro video transmission technology features 2.4 GHz and 5.8 GHz along with DFS frequency bands to meet the needs of professional studios for stable and reliable transmission.
- End-to-End Ultra-Low Latency - The DJI Video Receiver uses the same chip solution as DJI Ronin 4D. Each link of the transmission process has been optimized for an end-to-end ultra-low latency experience.
- Transmits Metadata via SDI - The DJI Video Receiver supports metadata transmission via SDI, making it especially suitable for use with large monitors.
- Dual-Link SDI + HDMI Simultaneous Output - SDI and HDMI out are supported for additional monitoring and control options as well as the transmission of metadata information.
- Includes DJI Video Transmitter, DJI Video Receiver, and more.
- This combo delivers extended-range, low-latency transmission, and supports metadata transmission via SDI, making it especially suitable for use with large monitors.
Unlimited Number of Receivers
Broadcast mode allows an unlimited number of receivers, convenient for real-time monitoring by multiple teams for enhanced efficiency.
Triple-Band Seamless Auto Hopping
Supports triple-band automatic frequency hopping between 2.4 GHz, 5.8 GHz, and DFS for optimal wireless channel use.
End-to-End Ultra-Low Latency
Use the same chip solution as Ronin 4D, with every link explicitly optimized to provide end-to-end ultra-low transmission latency.
Integrated Wireless Receiver
The DJI High-Bright Remote Monitor[3] integrates monitor and receiver with expansion features and supportive tools for precise control.
Remote Gimbal/Focus/Camera Control
When used with Ronin 4D Hand Grips or DJI Master Wheels, [5] you can remotely control Ronin 2, RS 3 Pro, focus, and camera functions.
Independent Recording and Playback
1080p/60fps H.264 footage can be independently recorded and stored on a microSD card, making it easy to edit samples right on set.
0404040 DJI Video Transmitter WB37 Battery Adapter RS Gimbal Mounting x1 x 1 x 2 Battery Charging Hub (USB-C) Plate x2 x1. x3 x4 x5 x6 x7 x8 x9 x10 x11 x12 x13 x14 x15 x16 x17 x18 x19 x20 x21 x22 x24