• EMAX Hawk Pro 5 Inch 4S-6S FPV racing drone front view with orange props and top antenna
  • EMAX Hawk Pro 5 Inch 4S-6S FPV quadcopter angled side view showing frame arms, motors, and canopy
  • Close-up of motor and orange propeller on the Hawk Pro quad, showing arm and motor bell detail
  • FPV camera canopy close-up with lens visible inside the Hawk Pro nose section
  • Under-canopy electronics close-up showing USB port and wiring on the quadcopter frame
  • Rear low-angle view of the Hawk Pro quadcopter showing back of canopy, battery lead, and props
1 6

EMAX Hawk Pro 5 Inch 4S-6S FPV Racing Drone BNF, F405 FC, 35A BLHeli_32 ESC, Caddx Ratel, 25-200mW VTX

EMAX Hawk Pro 5 Inch 4S-6S FPV Racing Drone BNF, F405 FC, 35A BLHeli_32 ESC, Caddx Ratel, 25-200mW VTX

Emax

$220.60 USD
$220.60 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
Type
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
View full details

Overview

EMAX Hawk Pro is a 5 inch FPV racing drone in BNF configuration, built around an F4 flight controller, 35A BLHeli_32 ESC, Pulsar 2306 motors, Caddx Ratel FPV camera, and a 25-200mW analog VTX.

The airframe uses a lighter canopy and an aerodynamic profile, and provides a mounting system for customization. The power system combines the Mini Magnum III stack with the Pulsar motor system and AVAN Scimitar propellers, and the speed control system supports input power up to 25.2 volts.

Key Features

  • 5 inch racing drone platform
  • Mini Magnum III F4 flight controller (MATEKF405 firmware)
  • Magnum 3-6S 35A BLHeli_32 electronic speed control
  • Pulsar 2306 LED performance brushless motors (1700KV-2400KV)
  • Caddx Ratel 1200TVL HDR FPV camera customized for Hawk Pro
  • 25-200mW 37CH VTX with Raceband
  • EMAX Tiny D8 FrSky receiver
  • Compatibility note: not compatible with 2019+ FrSky ACCESS protocol transmitters unless using FrSky external XJT module for D8 mode capability

Specifications

Class 5 inch FPV racing drone (BNF)
Battery support 4S-6S
Wheelbase (without propellers) 210mm
Weight (without battery) 265g
Motors Pulsar 2306 brushless motors (1700KV-2400KV, LED)
Flight controller Mini Magnum III F4 (MATEKF405 firmware)
ESC Magnum 3-6S 35A BLHeli_32
Receiver EMAX Tiny D8 FrSky receiver
FPV camera Caddx Ratel 1200TVL HDR (customized for Hawk Pro)
VTX 25-200mW, 37CH, Raceband
Input power limit (from product feature text) Up to 25.2 volts

What’s Included

  • Hawk Pro x1
  • Instruction manual x1
  • AVAN 5*3.0*3 propellers (3x CW, 3x CCW)
  • AVAN 5*2.8*3 propellers (3x CW, 3x CCW)
  • Extra hardware set x1
  • EMAX Nano RHCP SMA antenna x1
  • Clear translucent motor bases x4
  • Blue translucent motor bases x4
  • Spare canopy x1

Manuals

For setup assistance and after-sales support, contact support@rcdrone.top or visit https://rcdrone.top/.

Details

EMAX Hawk Pro 5 inch FPV racing drone (BNF) with red AVAN Scimitar propellers, front view

Built on a 5-inch racing frame, Hawk Pro balances agility with durability for everyday FPV flying.

Lightweight aerodynamic canopy and mounting space for an HD action camera on the Hawk Pro frame

A slimmer canopy and clean top-mount layout make it easy to keep the build aerodynamic while adding your own gear.

Close-up of Pulsar 2306 brushless motor with LED base and AVAN Scimitar 3-blade propellerMini Magnum III electronics stack close-up with F4 flight controller and 35A BLHeli_32 ESC wiring

The Mini Magnum III stack pairs an F4 flight controller with a 35A BLHeli_32 ESC for 4S–6S power setups.

Caddx Ratel FPV camera close-up on Hawk Pro canopy, centered lens view for analog FPV

Related Collections