SPECIFICATIONS
Wheelbase: Bottom Plate
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: Frame
Tool Supplies: Cutting
Technical parameters: Value 6
Remote Control Peripherals/Devices: Remote Controller
Recommend Age: 12+y
Recommend Age: 14+y
RC Parts & Accs: Landing Gear
Origin: Mainland China
Model Number: F450 450mm Quadcopter Frame Kit APM2.8 Module built-in Compass
Material: Composite Material
Four-wheel Drive Attributes: Motors
For Vehicle Type: Airplanes
Brand Name: Readytosky
readytosky is a professional FPV RC Module accessories company . if you want to know more about trade for wholesale and bulk purchase, please contact us freely .
F450 Frame
Mode 1 is Right Hand Throttle, mode 2 is Left Hand Throttle
APM V2.8.0 with compass description:
- This version eliminates the 1.0mm 6P SM06B GPS interface of V2.52 old version, and change it into DF13-4P I2C external compass interface.
- Put DF13-5P GPS interface with external compass interface, convenient for the connection of GPS and externalcompass.
- V2.52 I2C interface changes to multifunctional MUX interface
- Modified version added isolation resistor, when the OSD interface used with telemetry, the interfaces is effectively avoided
- V2.52 version 3.5V power supply adopts IPS79133, 6V withstand voltage, output current 100mA, need to supply power for six IC, slightly inadequate power supply ability, easy to be burnt dwon. The new version adopts US LP2985-3.3, 16V withstand voltage, more reliable, redcucing the possibility of Bad Gyro health
APM V2.8.0 Flight Controller
- Needle: staight
- Power supply: LP2985-3.3
- Max voltage: 16V
- Add a 47uF tantalum capacitor
- Port: MUX (UART0, UART2, mnnI2 and OSD are optional, OSD is the defaulted output)
Jumper cap choose:
- Built-in compass: plug the jumper cap in the MAG pin header.
- External compass: pull up the jumper cap from the MAG pin header.
7M GPS High Precision Built in Compass
With compass,and shell,especially for APM APM2.6 2.8
7M GPS Module for MWC/APM
These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play. This is NOT normally done in any other store!
Super Bright LED
BlackPlane with Standard Mk style mounting holes 45mm X 45mm
Blox Neo 6M Chipset
38400 bps (Default) Changed to 115200bps !
Output GGA, GSA and RMC frames
1Hz (Default) Changed to 5Hz!
Permanent Configuration Retention
Cable included
+ Moved LED to the Top
+ Bigger battery
+ compass on board
+ 6 pin connector for EZ connect to MEGA BLACK
+ 4 pin connector for onlyGPS use
+ 4 pin connecton for compass only use
+ GPS "PCB HOOD" for More EMI/RFI Shielding
can use both 4 pin at once
The GPS unit is per-configured for multiwii !! Unlike other shops send it out default settings, and yet you figure it out.
pre tested = PLUG AND PLUG for MWC 2.1!
MultiWii GPS assited Position Hold and RTH functions
7M GPS Module with on-board compass HMC5883 (compass) (mag)
Description:
- Main chip:U6M
- C/A code,1.023MHz
- Receiver Frequency:L1 [1575.42MHz]
- Locate performance
- 2D :3m(Average)
- 2D:2m(average),with WAAS
- drifting<0.02m/s
- accuracy:1us
- coordinate system:WGS-84
- max attitude height:18000
- Max speed:515m/s
- accerlaration:<4g
Specification:
- tracking sensitivity:-161dBm
- Capture sensitivity:-148dBm
- cold start time:38s average
- Warm start time:35s average
- hot start time:1s average
- Capture time:0.1s Average
- Temperature:40to +80
- wide power supply voltage:+3.5V~+5.5V
- Module V2.0
Power Module w/ UBEC and XT60 connectors for APM APM2.6 / APM 2.8 Controller
- 1 x F450 quadcopter frame kit with Plastic gear
- 4 X 2212 920KV Brushless Motor (2 CW , 2 CCW )
- 4 X 30A Simonk ESC
- 4Pairs X 1045 propeller (4 CW , 4 CCW)
tE@1 gift FLYSKY) Yaa TS-I6 Madytosk) FEDTTOSA! Fet tdtn Kadt Aneetnftm Mi Gpstoui