Remote Control Peripherals/Devices: Remote Controller
Tool Supplies: Battery
Quantity: 1 pcs
Technical parameters: KV1100
Model Number: ST-3025-C002
Four-wheel Drive Attributes: Motors
Wheelbase: Screws
Model Number: ST-3025-C002
Size: 40X20X40mm
Weight: 89± 1g
Gear type: Copper
Limit angle: NO limit
Bearing: Ball bearings
Horn gear spline: 25T
Motor: Coreless motor
Operating Voltage Range: 6-7.4V
Peak stall torque: 40kg.cm@12V
Rated torque: 10kg.cm@12V
Protocol Type: Half Duplex Asynchronous Serial Communication
Product Description
Product Name
12V 40KG 85RPM Brushless Motor 360 degrees Double
Material
Aluminium
Model No
STS3025BL-C002
Package
Paper box
ST-3025-C002 is 12V 40kg 85RPM serial bus smart servo，aluminum alloy case is used、brushless motor、metal gearbox 、Feetech self researched and developed TTL control board，12 bit high precision magnetic coding sensor. The stall torque is 20kg.cm，can achieve 0-360 degrees any angle controllable，multi-turn continuous operation mode，it can realize the function of setting the middle point with one key，acceleration slow start and slow stop，can feedback position、speed、voltage、current、temperature、load parameters，thus, overload and over-current protection can be realized. It is suitable for application in industrial equipment, robot and Small torque drive application scenarios.
Feetech ST-3025: A 12V, 40KG, all-metal brushless servo motor featuring a 360° high-speed rotation, serial bus communication, and acceleration start/stop/TTL level. It comes with a middle point/step motor mode and has an aluminum alloy shell with good thermal conductivity, manufactured using CNC precision technology.
The Feetech ST-3025 servo features a steel gear combination design that matches its all-metal upper and lower covers, ensuring a longer service life and making it suitable for various industrial equipment applications.
In this mode, absolute 360-degree angle control can be achieved, and acceleration/deceleration is supported. Additionally, Mode 3 features a speed closed-loop motor mode, where the speed will gradually slow down as the load increases.
The STS3025BL serial port servo requires power to be turned on before it can operate. The stall torque represents the maximum torque output of the servo, and we recommend using approximately 13-15% of this value as the recommended operating torque.
The Feetech ST-3025 servo can be controlled using the FE-URT-1 device. The FE-URT-1 provides a communication protocol, memory table, and serial port debugging assistance.
The connection diagram for connecting Feetech ST-3025 servo to Arduino or STM32 series development board is similar, noting that: (1) The level switch on Arduino is SV, while on STM32 it's 3.3V; (2) USB port and UART port cannot be used simultaneously; and (3) SVG ports are not applicable for this connection.
The accessories list for Feetech ST-3025 servo includes high-quality specialized products, priced at approximately €283 (no i38692m Setvo) for top-notch quality.
