FlyColor Trinx G20 45A 60A 3-6S 4in1 ESC with STM32G0, 20x20 Mount for FPV Drones

Overview

The FlyColor Trinx G20 4in1 ESC is a high-performance multi-rotor brushless ESC designed for FPV drones. It supports 3-6S LiPo input and offers two versions: 45A and 60A continuous current (55A/70A burst for 10s). Both versions feature a compact 44x36x6.3mm form factor and weigh only 14.4g, ideal for space-constrained racing builds. Built around an ARM 32-bit Cortex STM32G0 MCU running at up to 64 MHz, this ESC ensures precise throttle response with PWM frequency up to 128K. Compatible with Flycolor Raptor 5 flight controller and a wide range of protocols, it is the perfect choice for high-performance FPV setups.

Key Features

• High-performance MCU: ARM 32-bit Cortex STM32G0, frequency up to 64 MHz

• PWM frequency: Supports up to 128KHz, ensuring smoother and more responsive throttle

• Mounting holes: 20x20mm M3, compatible with most compact FPV frames

• Built-in current sensor: Integrated current sensing and VBAT output for telemetry

• Multiple protocol support: Supports PWM (1-2ms), Oneshot125, Oneshot42, Multishot, DShot, and ProShot

• Compact & lightweight: Only 14.4g with a compact layout for better airflow and integration

• Anti-interference circuit design: Enhanced layout for stronger signal integrity

Specifications

Connect Diagram

Top View

• Motor Pads: 1#, 2#, 3#, 4#

• Battery Pads: V+, V-

Bottom Connector Pinout

• TX: Telemetry

• CRT: Current meter

• S1–S4: Motor signal input

• NC: Not connected

• VBAT: Vbat output

• GND: Ground (3 pins)

Mounting Information

• Mounting Hole Pattern: 20x20mm

• Hole Size: M3

• Suitable for mini FPV racing drones and freestyle frames.

Details

FlyColor Trinx G20 4in1 ESC is a multi-rotor brushless speed controller with an ARM 32-bit Cortex MCU STM32G0, up to 64 MHz frequency, and PWM up to 128K for smoother high-throttle operation. It includes 20x20 mounting holes for flexible frame installation. Offered in 45A and 60A versions, it supports 3-6S batteries, providing efficient, reliable performance for multi-rotor use with precise motor control and improved flight stability.

Trinx G20 60A 4in1 ESC with ARM 32-bit Cortex MCU STM32G0, up to 64 MHz frequency and 128K PWM for smoother operation.

FlyColor Trinx G20 ESC includes a built-in current sensor, lightweight design, supports multiple protocols, and uses a high-performance ARM 32-bit Cortex MCU with up to 64 MHz frequency.

High-performance MCU: ARM 32-bit Cortex STM32G0, up to 64 MHz. Multi-rotor brushless ESC for advanced flight control.

FlyColor Trinx G20 ESC has advanced circuitry and strong anti-interference performance.

FlyColor Trinx G20 ESC supports multiple protocols: 1-2ms pulse width, Oneshot125, Oneshot42, Multishot, Dshot, and Proshot. Automatic signal detection upon power-up.

Diagram and size for FlyColor Trinx G20 45A 60A 3-6S 4in1 ESC. Top view: motor connections; bottom: telemetry, current meter, signal outputs, VBAT, ground pins.

LiPo cells for 3-6S applications, paired with Trinx G20 ESC. Key features include current ratings of 45A/60A and donut-shaped design. Burst current reaches 55A/70A at 10S. Measures 44x36x6.3mm, weighs 14.4g, and includes M3 mounting holes.

FlyColor Trinx G20 ESC specifications include 60A and 45A versions, both 4in1 with 3-6S battery support. Continuous currents are 60A and 45A, burst currents 70A and 55A respectively. Both lack BEC, weigh 14.4g, and measure 44x36x6.3mm. Firmware supports FPV applications, specifically Flycolor_Raptor_5. These ESCs are designed for high-performance drones, offering reliable power management and compact design for efficient flight control systems.