FS-R7P RC Receiver:

Model: FS-R7P

PWM Channels: 7

RF: 2.4GHz

Protocol: ANT

Range: >300M(Ground)

Antenna: Single Antenna

Input Power: 3.5-8.4V

RSSI: Support

Data Output: PWM

Temperature Range: -10℃-+60℃

Humidity Limit: 20%-95%

Waterproof Level:PPX4

Online Update: Yes

Dimensions: 35*23.3*13.3mm

Weight: 8g

Certification: CE,FCC ID:2A2UNR7P00

Introduction to ANT Automatic Frequency Hopping Digital System

ANT (ANT automatic frequency hopping digital system), developed by Flysky in 2020 with accumulating more than ten years of valuable development experiences, is a new system based on AFHDS 2A upgraded hardware platform using a new generation of highly integrated 2.4G chip. Through the RF advanced mode function, it is set with the number of RF transmission channels, resolution of each channel, distance, anti-interference, and transmission delay. With simple operations, the RF radio control system is created to meet user different demands.

ANT characteristic advantages

Bidirectional Real-time Data Transmission

This system features two-way communications. That is, the receiver receives data from the transmitter, and the transmitter can also receive the sensor data from the receiver such as temperature and speed. Users can obtain the current working state of the model. This can make users more joyful in the control and models become more secure. It is also compatible with one-way communication.

Intelligent Automatic RF Configuration

According to the hardware characteristics, certification requirements, as well as the product’s requirements on the transmission data volume, anti-interference, delay, and distance, the system is intelligently adapted to the corresponding RF configurations to meet user requirements.

Automatic Frequency Hopping

The system operates at 2.4 GHz ISM band: According to the intelligentized demand of RF configuration, the co-channel interference is avoided actively through different RF configurations, different boot time, different frequency hopping rules, and use of different frequencies.

Independent ID recognition system

Each transmitter and receiver of this system has a unique ID. After the transmitter binds with the receiver, the ID is stored in the receiver. When the receiver works, it authenticates this ID first. If the authentication fails, the receiver will fail to work. This can enhance the active anti-interference ability of the system, thus improving the stability of the system.

Highly Reliable System Design

This system uses a highly integrated hardware solution. This can reduce electronic materials while also improving system stability, reliability and production consistency.

Low Power Consumption

The use of low power consumption, high sensitivity devices and interval data transmission operation can reduce the system power consumption as low as one-sixth of the FM version, thus extending the battery service life.

[1] CHL/P [12] Code Key [2-5] CHZ-CHS [13] Code Interface [14] CH6 [7] BVDIVCC [15] Signal Terminal (Battery voltage detection power supply interface) [16] (Positive Electrode) [8] CH7 [17] (Negative Electrode).