Foxeer M10Q-120 V2 GPS Module U-Blox M10050, IST8310 Compass, Dual Protocol, 72CH, 1.5m Accuracy for FPV Racing and Long-Range Drones

Overview

The Foxeer M10Q-120 V2 GPS is a high-performance, compact GPS module designed for FPV drones and UAV applications. Powered by the 10th Generation U-Blox M10050 chip, it delivers fast positioning, precise navigation, and dual-protocol compatibility. With integrated IST8310 compass, multi-constellation support (GPS, GLONASS, BDS, GALILEO, QZSS, SBAS), and a built-in battery, it ensures stable and reliable operation even in dynamic environments.

Measuring only 12.5 × 17 × 5 mm and weighing 2.7 g, this GPS unit is optimized for lightweight builds while offering exceptional accuracy of 2D ACC 1.5 m and speed accuracy of 0.05 m/s, making it ideal for FPV racing, freestyle, and long-range drones.

Key Features

• U-Blox M10050 10th Gen Chip for ultra-fast positioning

• GPS + GLONASS + BDS + GALILEO + QZSS + SBAS multi-system compatibility

• IST8310 electronic compass for accurate orientation

• Dual Protocol (NMEA/UBLOX) for flexible integration

• 72 tracking channels with built-in ceramic antenna

• LED status indicator for power and positioning accuracy

• Compact & lightweight design (12.5 × 17 × 5 mm, 2.7 g)

• Betaflight & OSD support for seamless FPV integration

Specifications

Applications

• FPV racing drones

• Long-range UAVs

• Freestyle quadcopters

• Surveying & mapping drones

• RC aircraft requiring high-accuracy GPS

Details

Foxeer M10Q-120 V2 GPS uses U-Blox M10050, supports GPS+GLONASS+BDS, includes IST8310 compass, dual NMEA/UBLOX protocol, and provides 1.5m 2D accuracy for precise positioning.

Foxeer M10Q-120 V2 Dual Protocol IST8310 Compass NMEA/UBLOX

Foxeer M10Q-120 V2 GPS module; PPS LED green indicates power on and positioning accuracy via constant or flickering light.

Foxeer M10Q-120 V2 GPS connects to FC via TX, RX, GND, 5V, SCL, SDA pins.

Configure GPS on Betaflight: Connect to UART3, enable GPS with UBLOX protocol, set auto baud and config, use Galileo. Save, reboot, and verify GPS icon is active after powering on the flight controller.

OSD Config: Enable GPS in OSD menu. Select GPS sats, speed, direction, distance, and other options. Search satellites outdoors for best results. Use BF4.3.0 or above firmware.