FPV 2 Axis CNC Brushless Camera SPECIFICATIONS
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: Adapter
Tool Supplies: Cutting
Technical parameters: Value 2
Remote Control Peripherals/Devices: Receivers
RC Parts & Accs: Motor Components
Origin: Mainland China
Model Number: Gimbal
Material: Metal
Four-wheel Drive Attributes: Assemblage
For Vehicle Type: Airplanes
FPV 2 Axis CNC Brushless Camera Gimbal w/Motor Controller for Gopro SJ4000 SJ7000 camera DJI Phantom Walkera QX350 Aerial photo
Package included:
- 1 x Aluminum gimbal installed 2 motors (assembled)
- 1 x BGC Gimbal controller and sensor
- 1 x Pitch cable for reciver VR channel control the pitch by transmitter.
Product Description
Features:
- Simple structure and light weight,CNC aluminum alloy structure
- Brushless motor direct drive
- With anti-vibration rubber balls,easy to adjust
- Compatible with Gopro 3,2,1
- with 2pcs 2208 motors and BGC 2.0 gimbal controller,sensor(The BGC 2.0 controller is more better than V3 controller,it\'s more stable.
- with motor protector which can help heat dissipation
- Gimbal weight:210g(not including camera)
this is RTF version,you only need connect the battery on the plug,then it can work directly.
the Gimbal work alone,it don\'t need the NAZA support,very easy for use.
if you need use the pitch or roll control by phantom stock radio system,you need buy one more this receiver:
.
we have flashed the firmware,and adjust each one.
please make sure the Gopro Camera install the plate good,and let it stay on the horizontal position,
then connect the power plug with the 3S lipo battery charge plug,and wait 1-2 minutes,the frame will work good,you can test if you turn or shake,the Gopro 3 can keep horizontal position dynamically.
You should install your gopro camera first,then hold the gopro level by your hand ,when you connect battery.after 1-2 minutes,Release the hand,the gopro gimbal will work good.
Require battery
USD 17.9/piece