Futaba 12K S-FHSS and T-FHSS 12-channel 2.4GHz Radio with R3008SB 8 channel Rx - FUTK9300
This is the Futaba 12K which combines first-class performance with incredible versatility to create a system that’s easy to operate, yet feature-packed! Available in systems perfectly matched for airplanes, helis and gliders, the 12K is also compatible with multi-rotors, so pilots get the best of all worlds. Equipped with the rock-solid Futaba S-FHSS and T-FHSS protocols, the 12K is compatible with almost a dozen different Futaba receivers to suit modelers' needs. The 12K can transmit and receive telemetry data via the T-FHSS protocol. Simply install Futaba telemetry sensors (sold separately) to monitor flight data, receive alerts while in flight and more. These sensors allow pilots to keep track of battery voltage, altitude, speed and other key flight functions. In addition to telemetry, the 12K can be used with S.Bus 2 gear to add multiple servos, gyros and more to set-ups with fewer cables. Pilots with non-telemetry set-ups can take advantage of the interference-free S-FHSS protocol. A large, backlit LCD screen, expandable 30-model memory, a 6V 1800mAh NiMH battery and charger are just a few more of the features the 12K has to offer.
The Power of 2.4GHz The 12K utilizes modern 2.4GHz signal transmission and reception technology that delivers incredible reliability and unparalleled signal strength. |
74 Years of Service and Counting Futaba was founded in Japan in 1948. With over 5,000 international employees and hundreds of thousands of products delivered across generations, Futaba remains leaders in RC technology and products. Fly only the best with Futaba! |
Features:
- 14 channels (12 linear channels and 2 switches)
- Compatible with T-FHSS and S-FHSS protocols
- R3008SB 8 channel Receiver with telemetry capability
- Six 3-position switches, two 2-position switches, two slider levers, two rotary dials, four digital trims and two push buttons for quick, easy access
- Headphone plug, trainer port and S.Bus plug-in
- S.Bus 2 system allows multiple servos, gyros and telemetry sensors with a minimum number of cables
- Model types: six types of main wing with three tail types for airplanes, six swash types for helis and multi-rotor functions
- Improved stick feel with adjustable lengths and tension
- Included 6V 1800mAh NiMH battery and charger
- Large, backlit LCD screen with adjustable contrast. Push/dial operation simplifies set-up
Includes:
- Futaba 12K 12-Channel Transmitter
- R3008SB 8 channel Receiver with telemetry capability
- 6V 1800mAh NiMH battery and charger
- Instruction Manual
Product Specifications:
Number of Channels |
12 |
Modulation / Protocol |
S-FHSS and T-FHSS |
Band |
2.4Ghz |
Mode(s) |
Mode 1-4 (Default Mode 2) |
Model Memory |
30 Aircraft |
Display |
Backlit LCD |
Rotary Knobs |
1 |
2-Position Switches |
5 |
3-Position Switches |
2 |
Slider Switches |
None |
Momentary Switches |
1 |
Gimbals |
Dual Ball Bearing |
Telemetry |
Yes |
Voice Alerts |
No |
Memory Card Support |
No |
Data Port |
No |
Upgradeable Firmware |
Yes with CIU-2 Interface (FUTM0951) |
Trainer System |
Yes (Wired) |
Dual Rate / Expo |
Yes |
Throttle Cut |
Yes |
Servo Speed Adjustment |
No |
Battery |
6V 1800mAh battery (included) |
Precise performance for every pilot.
- Channels: 14 (12 proportional, 2 switched)
- Compatible with T-FHSS and S-FHSS protocols
- Six 3-position switches, two 2-position switches, two slider levers, two rotary dials, four digital trims and two push buttons for quick, easy access.
- Headphone plug, trainer port and S.Bus plug-in.
- S.Bus2 system allows multiple servos, gyros and telemetry sensors with a minimum number of cables.
- Model types: six types of main wing with three tail types for airplanes, six swash types for helis and multi-rotor functions.
- Improved stick feel with adjustable lengths and tension.
- Dual rates and exponential.
- Included 6V 1800mAh NiMH battery and charger.
- Large, backlit LCD screen with adjustable contrast for easier reading. Push/dial operation simplifies set-up.
- Micro memory card slot for storing model information and free system updates. (SD-32MB to 2GB; SDHC-4GB to 32GB, not included).
- Vibration feature alerts pilots to various alarms and timers, in addition to sound.
- 10-character model naming.
- 5 flight conditions (Helicopter and Glider model selections)
- 5 customizable programmable mixes
- Servo test and servo position display
- Fuel mixing.
- Stick calibration.
- Servo speed.
- Logic switching.
- 6 wing types.
- 3 tail wing types.
- 5 flight modes.
- Servo test and servo position display.
- Dual rates.
- Pitch curve.
- Throttle curve.
- Throttle delay.
- Aileron differential.
- Flap setting.
- Aileron to camber flaps.
- Aileron to brake flaps.
- Aileron to rudder.
- Rudder to aileron.
- Camber mix.
- Elevator to camber.
- Camber flap to elevator.
- Butterfly function.
- Trim mix.
- Air brake.
- Gyro mix.
- V-Tail.
- Ailevator (dual elevator).
- Winglet.
- Motor speed.
- Rudder to elevator.
- Snap roll.
- Multi engine functionality
- Airbrake.
- Six swash types.
- Pitch curve and pitch trim.
- Throttle curve and throttle hover trim.
- Throttle hold.
- Swash ring.
- Pitch to needle.
- Pitch to rudder (revolution mixing).
- Gyro mixing.
- Governor mixing.
- Timer settings.
- Throttle percent timer.
- Six wing types.
- Three tail wing types.
- Throttle stick position warning.
- Gyro sense.
- Flight mode.
- Throttle curve.
- Throttle delay.
- T-FHSS protocol
- Dual Antenna Diversity
- S.Bus/S.Bus 2 ports (S.Bus 2 port for bidirectional telemetry sensors)
- 8-channel PWM conventional ports
- High voltage
- Battery fail-safe
- External voltage port: 0-70V DC
- Power requirement: 4.8-7.4V
- Dimensions: 0.98 x 1.86 x 0.56 in (24.9 x 47.3 x 14.3 mm)
- Weight: 0.36 oz (10.1 g)