GEPRC TAKER F722 45A 32Bit AIO Flight Controller w/ 32Bit ESC, ICM42688-P, 2-6S LiPo, Type-C

Overview

AIO flight controller GEPRC TAKER F722 45A 32Bit AIO combines an STM32F722 MCU with an ICM42688-P (SPI) gyro and an integrated 32-bit 45A ESC. It provides 5 full UART ports, Betaflight OSD (AT7456Ev), onboard flash blackbox (16Mb), and Type-C USB. The board supports 2~6S (LiPo) battery input and is specified at 9.2g.

Tagline shown on the product graphic: “Unstoppable Power, Limitless Potential”.

Key Features

• STM32F722 MCU (graphic states 216MHz operating frequency).
• ICM42688-P (SPI) gyroscope.
• Integrated 32Bit 45A ESC; graphic states PWM up to 128K refresh rate.
• 5 UART ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5.
• Built-in onboard barometer; graphics indicate INAV firmware support and “Precise altitude control with barometer using INAV firmware”.
• External magnetometer support (graphic notes T3/R3 interface for external magnetometer).
• Solder-free connection to an HD VTX via a dedicated 6-pin port on the bottom (as described).
• USB wiring board for flexible data interface placement (as shown).
• Supports OSD tuning, buzzer, and LED (as described and specified).
• ESC current rating shown: continuous current 45A; peak/burst shown as 55A (10s) and also 55A (10A) on the specification image.

For customer service and installation support, contact https://rcdrone.top/ or email support@rcdrone.top.

Specifications

Wiring / Interface (as shown)

• Battery pads: BAT+ and GND (BAT label: 2-6S (8.4-25.2V)).
• Motor outputs: Motor1, Motor2, Motor3, Motor4 (M1, M2, M3, M4 positions shown).
• Buzzer / LED pads: GND, BZ, 5V, LED.
• UART/IO pad labels shown on the board edge: T3, R3, R1, T1, VO, VI, G, 5V, T4, R4; and groups including G/5V with R2/T2 and R5/T5.
• Receiver wiring example shown: TBS Nano RX and GEPRC ELRS connected using RX/TX, 5V, and GND (board labels show RX2/TX2 on the example).
• GPS with compass wiring example shown (module labeled GEP-M8Q): GNSS: GPS+BD5; Magnetometer: QMC5883L; Barometer: MS5611; Input voltage: 3.3-5V; Baud rate: 115200bps; Protocol: UBLOX(GPS), I2C(mag&Baro); MAG Alignment: CW 180° flip.

What’s Included

• 1x TAKER F722 45A AIO FC
• 1x XT30-18AWG wire-7cm
• 1x 35V 220uF capacitor
• 1x SH1.0-6Pin to GH1.25-8Pin adapter cable
• 1x SH1.0-6Pin cable
• 8x M2x6.5mm FC dampening balls (black)

Applications

• 2~6S (LiPo) AIO FC/ESC builds requiring a compact 35mm * 33.5mm board and 25.5 mm * 25.5mm mounting pattern.
• Builds using Betaflight OSD and Type-C USB configuration.
• INAV setups requiring a built-in barometer and optional external magnetometer connection (T3/R3 interface shown).
• Installations using a bottom 6-pin HD VTX plug-in port to reduce soldering.

Details

GEPRC TAKER F722 45A 32Bit AIO offers unstoppable power, featuring built-in ESC, gyroscope, barometer, 5 UART ports, USB wiring board, 128K PWM, INAV support, and external magnetometer.

Ultra-light 9.2g FC with barometer, STM32F722 MCU, 32-bit ESC firmware, ICN42688-P gyro, 45A continuous/55A peak current, supports 2-6S batteries, plug-and-play HD VTX compatibility.

Adopts STM32F722 MCU at 216MHz, paired with ICM42688-P gyroscope. Compact flight controller design featuring ARM processor, USB port, and labeled connectors for drone applications.

Integrated 32-bit 45A ESC with firmware supporting PWM up to 128KHz refresh rate ensures smoother flight. The board includes labeled components like AT32F421 microcontrollers and GEP-F 45AAIC markings. Gold-plated contacts and precise soldering reflect high-quality construction. Designed for advanced drone performance, this AIO flight controller delivers power efficiency and responsive control—ideal for FPV racers needing enhanced stability and agility during high-speed maneuvers.

The design supports an external magnetometer via the T3 R3 interface and includes a built-in barometer for precise altitude control with INAV firmware. The circuit board has labeled pins, integrated STM32F722 chips, and clearly marked components such as BOOT and power connections. This layout emphasizes advanced flight control in a compact, engineered form optimized for drone performance and reliability.

Supports INAV firmware installation via configurator, includes a USB wiring board for flexible data interface placement, and is compatible with GEPRC F722_AIO versions up to stable release 8.0.0.

Solder-Free, Plug and Play: Easily connect to any HD VTX without soldering hassle. Features compact design with camera and flight controller.

Features STM32F722 MCU, ICM42688-P IMU, Betaflight OSD, Type-C USB, 9.2g weight, 45A continuous current, Dshot600 protocol, 2–6S LiPo input, and 35×33.5mm board size.

Wiring diagram for GEPRC TAKER F722 flight controller. Shows motor, battery, LED, buzzer, and sensor connections with pin labels like GND, 5V, R1–R5, T1–T5, V0–V1, BOOT, M1–M4.

Wiring diagrams for receiver and GPS with compass connections to GEPRC flight controller. Includes TBS Nano RX, GEPRC ELRS, and GEP-M8Q module pinouts and power requirements.

GEPRC TAKER F722 45A 32Bit AIO Flight Controller dimension diagram displays 35mm width, 33.5mm height, 25.5mm depth with labeled components and mounting holes.

GEPRC TAKER F722 45A 32-bit AIO flight controller uses an STM32F722 chip, multiple ports, labeled components, compact layout, and gold-plated connectors for drone applications.

GEPRC TAKER F722 45A 32Bit AIO Flight Controller with ARM processor, USB port, labeled pins, and mounting holes. Compact design for drone applications.

GEPRC TAKER F722 45A 32Bit AIO Flight Controller with capacitors, standoffs, ribbon cable, and power leads included.