GEPRC TAKER F722 BT 60A 6S Stack – 512M Blackbox, Bluetooth Tuning, DJI Plug, F722 FC + 4in1 ESC

Overview

The GEPRC TAKER F722 BT 60A Stack is engineered for high-performance FPV builds, offering both stability and flexibility. With the STM32F722 MCU, ICM42688-P gyro, and Bluetooth tuning capability, this flight controller provides top-tier control precision. The generous 512MB blackbox ensures extended flight log capture, while the plug-and-play DJI Air Unit port, dual BEC outputs, and shock-dampened mounting streamline digital integration. Paired with the TAKER 60A 4-in-1 ESC, this stack supports up to 6S LiPo and delivers smooth, reliable output even in demanding freestyle or long-range scenarios.

Key Features

• STM32F722 flight control chip with ICM42688-P gyro

• 512MB onboard blackbox for advanced flight data logging

• Bluetooth support for wireless parameter adjustment

• Clean power with integrated LC filter and barometer

• Type-C USB interface for fast and reliable configuration

• Plug-and-play compatibility with DJI Air Unit

• Dual BEC outputs: 9V@2.5A and 5V@3A

• Optimized layout with vibration-damping silicone grommets

• Paired with 60A ESC supporting 6S LiPo and DShot150/300/600

Specifications

Flight Controller – GEP-F722-BT-HD V3

• MCU: STM32F722

• Gyro: ICM42688-P (SPI)

• Barometer: Supported

• Blackbox: 512MB onboard

• Bluetooth: Supported (UART4 fixed)

• DJI Plug: Directly supported

• USB Port: Type-C

• OSD: BetaFlight OSD with AT7456E

• BEC: 5V@3A and 9V@2.5A dual output

• Input Voltage: 3–6S LiPo

• UART Ports: 5

• Power Filtering: Integrated LC filter

• Firmware Target: GEPRCF722_BT_HD_V3

• Dimensions: 36.9 × 36.9mm

• Mounting Pattern: 30.5 × 30.5mm (φ4mm, converts to φ3mm with silicone grommets)

• Weight: 8.2g

ESC – TAKER H60_BLS 60A 4IN1

• Input Voltage: 3–6S LiPo

• Continuous Current: 60A

• Burst Current: 65A (5 seconds)

• Ammeter: Supported (calibration value not specified)

• Supported Protocols: DShot150 / 300 / 600

• Size: 42 × 45.7mm

• Mounting Pattern: 30.5 × 30.5mm (φ4mm, converts to φ3mm with silicone grommets)

• Weight: 14.9g

• Firmware Target: B_X_30

What's Included

• 1 × F722-BT Flight Controller

• 1 × 60A 4-in-1 ESC

• 1 × Capacitor

• 1 × O3 3-in-1 connection cable

• 1 × FC adapter cable

• 1 × SH1.0 4-pin silicone cable

• 1 × Camera connection cable

• 1 × VTX connection cable

• 1 × XT90 power cable

• 4 × M3×30 screws

• 4 × M3×25 screws

• 8 × Nylon nuts

• 12 × Silicone anti-shake pads

Details

GEPRC Taker F722 8-bit 60A ESC V2.0 with a stack of motor settings: 388,788.

GEP-F722-BT-HD V3 Flight Controller specifications: STM32F722 MCU, ICM42688-P IMU, and SPI connection. Supports DJI Air Unit Black Box S12M onboard Bluetooth. Features a BetaFlight OSD with AT7456E chip. Has a dual BEC (5V@3A, 9V@2.5A) and supports Dshot protocols.

The product features a mainstream STM32F722 chip, equipped with the latest 42688-P gyroscope, 512MB black box storage. It supports Bluetooth parameter tuning, integrated LC filter, and upgrade type-C USB interface. The device directly plugs into the DJI Air Unit, integrating a barometer. Powering the device are dual independent BECs, capable of delivering 9V at 2.5A and 5V at 3A. Additionally, it features a TAKER H6O_BLS 60A 4INI ESC for silky flight performance. Installation is simple and effective with shock-absorbing mounts for stable gyroscope performance.

Product Display 4.87 G82R with high-quality features and advanced technology for use.

Ace Flexible Display Watch with large 1.67 inch screen and LTE connectivity features.

Product List: Essentials for a drone. Includes FC board, ESC board, capacitor, connection cables (3-in-1, camera, VTX), adapter cables (FC, sh1.O), power cable (XT90), screws, nuts, and silicone anti-shake pads.