GEPRC TAKER H743 BT 32Bit 65A Stack - STM32H743, Dual Gyro, Bluetooth Tuning, 512M Black Box

Overview

The GEPRC TAKER H743 BT 32Bit 65A Stack is a stack combining a TAKER H743 BT flight controller and a TAKER H65_8S_32Bit 65A 4IN1 ESC. It uses an STM32H743VIH6 flight controller chip (Cortex-M7) with a 480MHz operating rate, dual gyroscopes (MPU6000 + ICM42688-P), integrated Bluetooth for wireless tuning, and 512M onboard black box storage. The stack supports multiple open-source firmware options including Betaflight, INAV, and Ardupilot, and provides 8 motor outputs for X8 mode.

Key Features

• Flight controller MCU: STM32H743 (STM32H743VIH6, Cortex-M7), 480MHz operating rate
• Integrated dual gyroscopes: MPU6000 + ICM42688-P (dual gyro)
• Bluetooth wireless tuning (Speedybee app support shown)
• 512M onboard black box storage (shown as a 512MB built-in SD card/onboard storage)
• Integrated barometer
• 7 UART ports (UART3 fixed for Bluetooth)
• Dual BEC output: 5V@3A and 12V@2.5A (dual BEC); 12V / voltage switch shown
• Direct plug for DJI Air Unit
• Plug-and-play direct-connect ports shown for RX, DJI O3, VTX, Buzzer, ESC, and Camera
• ESC protocol support: Dshot 150/300/600

Note (from product image): simultaneous dual gyroscope is not supported in Betaflight and INAV.

For customer service and order support, contact https://rcdrone.top/ or email support@rcdrone.top.

Specifications

TAKER H743 BT Flight Controller

TAKER H65_8S_32Bit 65A 4IN1 ESC

What's Included

• 1 x TAKER H743 BT Flight Controller
• 1 x TAKER H65_8S_32Bit 65A 4IN1 ESC
• 1 x Electrolytic capacitor (50V 1000uF)
• 1 x DJI connection cable (SH1.0 6pin 100mm)
• 1 x VTX connection cable (SH1.0 4pin-6pin 100mm)
• 1 x Receiver silicone cable (SH1.0 4pin 150mm)
• 1 x Camera connection cable (SH1.0-SH1.25 3pin 60mm)
• 1 x FC adapter cable (SH1.0 8pin 30mm)
• 1 x XT60 power cable (12AWG 110mm)
• 4 x M3*30 screws
• 4 x M3*25 screws
• 8 x Nylon nuts (M3)
• 12 x Silicone anti-shake pads (M3)

Applications

• Multi-rotor builds requiring a flight controller + 4-in-1 ESC stack
• Racing and freestyle flight setups (as stated in product materials)
• X8 mode builds (8 motor outputs / X8 mode support shown)
• Firmware setups using Betaflight, INAV, or Ardupilot

Details

GEPRC TAKER H743 BT 32Bit 65A Stack delivers top-tier performance. Features include H743 chip, dual gyroscope, 512M flash, Bluetooth, onboard barometer, multi-firmware support, 8 motor outputs, and 7 UART ports. Designed for high efficiency and advanced control, this stack combines power and precision for demanding applications.

Advanced H743 flight controller chip with Cortex-M7 core and 480MHz speed ensures faster processing and stable drone flight performance.

GEPRC TAKER H743 BT uses MPU6000 and ICM42688-P gyros for racing and freestyle. Dual gyro unsupported in Betaflight/INAV. Board has illuminated traces and labeled components.

Bluetooth wireless tuning enables easy smartphone adjustments via Speedybee app. Features ESP32-C3 chip, illuminated circuitry, and real-time telemetry data for drone setup and monitoring.

Features large-capacity onboard SD card with 512MB built-in storage for extensive data. Highlighted chip marked “512M” ensures reliable memory integration within the electronic stack design.

Plug-and-play convenience with direct-connect ports for easy setup. GEPRC TAKER H743 BT supports peripherals like ESC, Camera, Buzzer, DJI O3, VTX, and RX via illuminated circuit pathways.

Supports open-source firmware like Betaflight, INAV, and Ardupilot, enhancing flight controller versatility. Includes configurator interfaces showcasing compatibility and customization options for drone enthusiasts and professionals.

TAKER H65 8S 32Bit 65A 4IN1 ESC for superior output, powerful flight performance.

Detail views of the GEPRC TAKER H743 BT 65A stack highlight dual BEC configuration, an integrated barometer, X8 mode support, and a 12V voltage switch.

Specification overview for the GEPRC TAKER H743 BT flight controller and 65A 32-bit 4-in-1 ESC stack, including key ports and power details.

GEPRC TAKER H743 BT 32Bit 65A Stack with multiple connectors, gold ports, and labeled components for drone flight control systems.

GEPRC TAKER H743 BT is a 32-bit flight controller stack with 65A ESCs. Features include STM32H743 microcontroller, ESP32-C3 Wi-Fi/Bluetooth module, and USB-C port. Board has labeled motor outputs M1–M4, battery input, current sensing, and telemetry pins. Gold-plated edge connectors ensure secure stacking. Designed for high-performance FPV drones, it supports advanced firmware like Betaflight. Compact layout integrates power distribution and control in one unit. Ideal for racing and freestyle applications requiring reliability and speed.

Includes TAKER H743 BT flight controller, H65_8S ESC, capacitor, cables, screws, nuts, and anti-shake pads—ideal for drone builds with a clear component list and visual layout.