GEPRC TAKER H743 BT 8Bit 80A Stack - STM32H743, Dual Gyro, Bluetooth, 512M Black Box, 3-6S

Overview

GEPRC TAKER H743 BT 8Bit 80A STACK is a stack designed around the STM32H743 flight controller and a matched 8Bit 80A 4-in-1 ESC. It integrates Bluetooth tuning, 512M onboard Black Box storage, dual gyroscopes (MPU6000 + ICM42688-P), an onboard barometer, and supports open-source firmware including Betaflight, INAV, and Ardupilot.

Key Features

• STM32H743VIH6 with Cortex-M7 core, 480MHz operating rate
• Integrated dual gyroscopes: MPU6000 + ICM42688-P (dual gyro)
• Bluetooth wireless tuning (Speedybee app on smartphone)
• 512M onboard Black Box storage (large-capacity onboard storage)
• Onboard barometer
• 7 UART ports (UART3 fixed for Bluetooth)
• 8 motor outputs; supports X8 mode
• Plug-and-play direct-connect ports for common peripherals (RX, DJI O3, VTX, Buzzer, ESC, Camera)
• Dual BEC configuration: 5V@3A and 12V@2.5A; 12V / voltage switch
• Matched ESC: 8Bit 80A 4-in-1 ESC; Dshot 150/300/600

Note: Simultaneous dual gyroscope is not supported in Betaflight and INAV.

For customer service and technical support, contact https://rcdrone.top/ or email support@rcdrone.top.

Specifications

Flight Controller: TAKER H743 BT Flight Controller

ESC: TAKER H80_BLS 80A 4IN1 ESC

What's Included

• 1 x TAKER H743 BT Flight Controller
• 1 x TAKER H80_BLS 80A 4IN1 ESC
• 1 x Electrolytic capacitor (50V 4700uF)
• 1 x DJI connection cable (SH1.0 6pin 100mm)
• 1 x FC adapter cable (SH1.0 8pin 30mm)
• 1 x Receiver silicone cable (SH1.0 4pin 150mm)
• 1 x Camera connection cable (SH1.0-SH1.25 3pin 60mm)
• 1 x VTX connection cable (SH1.0 4pin-6pin 100mm)
• 1 x XT90 power cable (10AWG 230mm)
• 4 x M3*30 screws
• 4 x M3*25 screws
• 8 x Nylon nuts (M3)
• 12 x Silicone anti-shake pads (M3)

Applications

• Multirotor builds requiring an H743 FC + 80A 4-in-1 ESC stack
• Firmware setups using Betaflight, INAV, or Ardupilot
• X8 mode builds using 8 motor outputs

Details

The GEPRC TAKER H743 BT 8Bit 80A Stack offers top-tier performance with an H743 chip, dual gyroscope, 512M flash, Bluetooth, onboard barometer, multi-firmware support, 8 motor outputs, and 7 UART ports. Built for high-end applications, it integrates advanced sensors, robust connectivity, and scalable firmware to deliver precise flight control and extensive customization options.

Advanced H743 flight controller chip with Cortex-M7 core runs at 480MHz for faster processing and stable drone flight performance.

GEPRC TAKER H743 BT uses MPU6000 and ICM42688-P gyros for racing/freestyle, though dual gyro unsupported in Betaflight/INAV. Board has orange traces, labeled components, and full specs.

Bluetooth Wireless Tuning enables easy smartphone adjustments via Speedybee app. Features ESP32-C3 chip, illuminated circuitry, and real-time telemetry display for drone performance optimization.

Features large-capacity onboard SD card with 512MB built-in storage for extensive data. Highlighted chip marked “512M” ensures reliable memory integration within compact electronic design.

Plug-and-play convenience with direct-connect ports for easy setup. GEPRC TAKER H743 BT supports peripherals like RX, DJI O3, VTX, Buzzer, ESC, and Camera via illuminated circuit pathways.

Supports open-source firmware like Betaflight, INAV, and Ardupilot, enhancing flight controller versatility. Includes configuration tools for tuning and updating firmware across platforms.

8Bit 80A 4IN1 ESC for superior powerful flight performance

Dual BEC, integrated barometer, X8 mode support, 12V switch. Labeled components and connections for drone flight controller functionality.

Features STM32H743 MCU, dual gyro IMU, 512MB black box, Bluetooth, USB Type-C, barometer, 80A ESC, Dshot support, 3–6S LiPo input, weighs 28.1g, dimensions 56.1×61.1mm.

GEPRC TAKER H743 BT 8Bit 80A Stack product display.

GEPRC TAKER H743 BT 8Bit 80A Stack shown from three angles with connectors, ports, and labeled components for drone flight control.

Includes TAKER H743 BT flight controller, H80 BLS ESC, capacitor, various SH1.0 cables, XT90 power cable, screws, nylon nuts, and silicone anti-shake pads for drone assembly.