SPECIFICATIONS
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: Frame
Tool Supplies: Grinded
Technical parameters: Value 3
Remote Control Peripherals/Devices: Remote Controller
Recommend Age: 14+y
Recommend Age: 12+y
RC Parts & Accs: Transmitters
Quantity: 1 pcs
Origin: Mainland China
Model Number: BN220 BN-220 / BN880 BN-880 GPS
Material: Metal
Four-wheel Drive Attributes: Assemblage
For Vehicle Type: Airplanes
Brand Name: Readytosky
BN880 use for: APM 2.6 APM2.8 / Pixhawk 2.4.7 PIXHAWK 2.4.8
BN220 use for: F3 / F4 / F7 Flight controller
readytosky is a professional FPV RC Module accessories company . if you want to know more about trade for wholesale and bulk purchase, please contact us freely .
New BN-880 BN880 Flight Control GPS Module Dual Module Compass With Cable for APM 2.6 APM2.8 / Pixhawk 2.4.7 PIXHAWK 2.4.8
Features:
GPS Module,Dual Module Compass
With electronic compass IC HMC5883
1.25mm spacing between the 6pins patch seat
Model:BN-880
Power Supply:DC Voltage 2.8V~6.0V,Typical:3.3V or 5.0V
Consumption:Capture 50mA@5V
Receiving Format:GPS,GLONASS,BeiDou,QZSS and SBAS
Receiving Channel:72 Searching Channel
Receiving Sensitivity:Trace -167dBm
Capture-148dBm
Positioning Time:Cold Start:avg26s
Warm Start:avg25s
Hot Start:avg3s
Level Positioning Precison:2m At Open Wind
Output Frequency:1Hz-10Hz,Default 1Hz
Speed Precison:0.1 m/s (Without Aid)
Acceleration Precison:0.1 m/s (Without Aid)
Dynamic Characteristics:Max Height:18000m
Max Speed:5153m/s
Max Acceleration:4G
UART Interface:UART Port:TXDA and RXDA
Support Rate:4800bps to 115200bps,Default 38400dps
Working Temperature:-40-+85
Storage Temperature:-40-+85
Size:28mm x 28mm x 10mm
Weight:10g
The Module’s Pins:SDA,GND,TX,RX,VCC,SCL
We left a connector for APM extra,If you need used for APM, you can install the connector by yourself or leave us a message ,we will change for you . Original connector is for Pixhawk flight control board my friend!
BN-220 3.6V-5.5V TTL level GNSS Module GPS GLONASS Dual GPS Module built in FLASH BN220 for F3 / F4 / F7 Flight controller
Model:BN-220 GNSS module
Iitem |
Description |
|
Electrical Characteristics |
Chipset |
M8030-KT |
Frequency |
GPS L1, GLONASS L1, BDS B1, SBAS L1, QZSS L1 |
|
Receiving Format |
GPS, GLONASS, BDS, SBAS, QZSS. Default GPS, GLONASS, SBAS, QZSS. |
|
Channels |
72 Searching Channel |
|
Sensitivity |
Tracking |
-167dBm |
Reacquisition |
-160dBm |
|
Cold Start |
-148dBm |
|
Hot Start |
-156dBm |
|
Accuracy |
Position Horizontal |
2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky) |
Velocity |
0.1m/sec 95% (SA off) |
|
Timing |
1us synchronized to GPS time |
|
Acquisition Time |
Cold Start |
26s |
Warm Start |
25s |
|
Hot Start |
1s |
|
Data Output |
Support Rate |
4800bps to 921600bps, Default 9600bps |
Data Level |
TTL Level |
|
Data Protocol |
NMEA-0183 |
|
NMEA Message |
RMC, VTG, GGA, GSA, GSV, GLL |
|
Update Rate |
1Hz-10Hz, Default 1Hz |
|
FLASH |
4M FLASH, Store the configuration permanently |
|
Operational Limits |
Altitude |
<50,000m |
Velocity |
<515m/s |
|
Acceleration |
<4g |
|
Power Consumption |
VCC |
DC Voltage 3.6V-5.5V, Typical: 5.0V |
Current |
Capture 50mA/5.0V |
|
Mechanical Specifications |
Dimension |
22mm*20mm*6mm |
Weight |
5.3g |
|
Connector |
1.00mm 4pins connector |
|
Environment |
Operating Temp |
-40 °C ~ +85°C |
Storage Temp |
-40°C ~ +105°C |
|
LED |
Built-in LED |
TX LED: blue. The data output, TX LED flashing |
PPS LED: red. PPS LED not bright when GPS not fixed, flashing when fixed |
PIN |
PIN Name |
I/O |
Description |
1 |
GND |
G |
Ground |
2 |
TX |
O |
Serial Data Output. |
3 |
RX |
I |
Serial Data Input. |
4 |
VCC |
I |
DC 3.6V - 5.5V supply input,Typical: 5.0V |