Hobbywing XRotor F7 Flight Controller Convertible, DJI Image Transmission Port, OSD, 5V/10V BEC, MicroUSB

Overview

The Hobbywing XRotor F7 Flight Controller is a Micro F7 Flight Controller Convertible designed for FPVs with 130-300mm FPVs diagonal wheelbase. It features a special interface for DJI image transmission system with a corresponding flat cable for plug-and-play connection.

Key Features

• Super hardware and running speed: STM32F722 MCU, high-sensitivity MPU6500 six-axis motion sensor, supports bidirectional DShot digital throttle communication.
• Integrated OSD: OSD parameters can be adjusted in FC parameter adjustment software and by radio; built-in OSD with DJI VTX system plug-and-play port.
• On-board large capacity Flash memory: Records and stores more flight logs for debugging based on flight data.
• On-board 5V & 10V dual BEC circuit: FMU integrates with 10V BEC circuit for image transmission and LED devices (12V LED devices referenced).
• On-board Pit Switch module: Can open or close VTX by radio after being adjusted in FC parameter software.
• Wide firmware support: Supports BetaFlight, Cleanflight, Butterflight, inva, and other mainstream FPV firmware.
• Unique installation design and shock absorption structure: Double hole distance mounting hole design and a flexible flat cable connection mode; double M3 mounting holes with damping aprons.
• Monitoring and I/O support: Volt/Amp monitoring ports, external buzzer output, LED control, and MicroUSB for firmware flashing and parameter adjustment.
• Matched system integration: Designed to match with Hobbywing tower 4in1 ESC for easier installation and wiring.

Specifications

What’s Included

• Micro F7 Flight Controller Convertible
• Flat cable for DJI image transmission system port (mentioned as equipped)
• Capacitor (mentioned as included in the box; intended to be soldered onto the ESC when soldering input wires)

Applications

• FPV builds with 130-300mm diagonal wheelbase
• Compatible setup and tuning via Betaflight/Cleanflight-configurator and other software
• Combo available: XRotor 4in1 FPV Combo
• Best match with: Xrotor brushless motor, Azure Power Propellers, HOBBYWING VTX (Video Transmitter)

Important

Please ensure that you’ll solder the capacitor included in the box onto the ESC when soldering input wires; otherwise the ESC may be damaged.

Manuals

Manual Download (PDF)

Customer service: support@rcdrone.top or https://rcdrone.top/

Details

The XRotor F7 flight controller includes a dedicated DJI image transmission system port for plug-and-play connection with a matching flat cable.

The Hobbywing XRotor F7 flight controller is presented as supporting popular FPV firmware including Betaflight, Cleanflight, Butterflight, and INAV.

The XRotor F7 flight controller is designed to stack neatly with a Hobbywing 4-in-1 ESC for a cleaner, easier-to-wire build.

The XRotor Flight Controller F7 uses an STM32F722 MCU and includes integrated OSD and on-board flash for flight log storage.

The Hobbywing XRotor F7 flight controller includes an on-board 5V and 10V dual BEC circuit for powering supported electronics.

The XRotor F7 flight controller uses soft-mounted holes and a flexible cable connector to help fit 30×30mm or 20×20mm frames.

The XRotor F7 flight controller includes an on-board Pit Switch module for controlling a VTX from radio settings after configuration in FC software.