Description：

• Exceptional flight performance. Lightweight. Ultra-low vibration. Easy to maintain. This is state-of-the-art FPV V2.0.
  
• When I set out to create a bind and fly version of the AOS 5 V2 I had a vision to combine the latest and greatest technology into the ultimate FPV freestyle machine. This is the result. - Chris Rosser, AOS RC
  
• Frame: The AOS 5 V2 has been designed to deliver the ultimate freestyle flight experience. The unique arm geometry has been refined through topology optimization to deliver maximum strength and stiffness for minimum weight. The same technology is used to optimize aircraft, satellites and race cars.
  
• Motors: Exhilarating speed, silky smooth flight after flight. iFlight's XING2 2207 motors provide power and durability with a 7075 Aluminium unibell design, 5mm titanium shaft, Japanese NSK bearings, N52H center slotted arc magnets, and an integrated o-ring for bearing protection.
  
• Electronics: Blazing fast with less filter delay for a more locked-in flight feel. The F7 flight controller takes maximum advantage of the vibration performance of the frame with a custom filter tune to reduce latency and improve propwash handling. With OSR4 mode enabled in BF4.3 the BMI270 gyro delivers latency and noise performance that matches or exceeds that of the MPU6000. A BLHeli32 ESC smoothly delivers power to the motors and the massive 55A rating ensures the motors will have all the power they could ever need.

• Mount pattern:   20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws

• Smartaudio / IRC Tramp VTX protocol supported

• Firmware target:   IFRC-IFLIGHT_BLITZ_F722

• Motor outputs:   4x (SH1.0 connector)

• Flash:  16MB (Blackbox flash)

• I2C serial:   SDA / SLA pads

• Dimensions:   30.5x27 mm

• MCU:   STM32 F722

• Barometer:  DPS310

• OSD Chip:   AT7456

• LED controller:   Yes

• Beeper pad:   Yes

• Gyro:   BMI270

• Weight:   5g

• UARTS:   6
  

Note:

• All iFlight BNFs are tested before shipment to guarantee the highest quality. 

• If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

• iFlight takes no responsibility for issues with DJI or Caddx 3rd party gear (Video transmitters, Goggles, Radios, etc) and must be directly reported to www.caddxfpv.com/pages/contact-us or www.dji.com/support.