SPECIFICATIONS
Wheelbase: Bottom Plate
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: Frame
Tool Supplies: Battery
Technical parameters: Value 2
Size: 7inch
Remote Control Peripherals/Devices: Remote Controller
Recommend Age: 12+y
RC Parts & Accs: Antennas
Quantity: 1 pcs
Origin: Mainland China
Model Number: Chimera7 Pro HD
Material: Carbon Fiber
Four-wheel Drive Attributes: Assemblage
For Vehicle Type: Airplanes
Certification: CE
Brand Name: IFLIGHT
A super-efficient iFlight 7.5inch Long-Range bird that can go where you couldn't go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! A super stiff frame for minimum resonance and XING2 2809 motors for maximum 7.5inch prop control. Fly big batteries top-mounted, or even bigger batteries bottom mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S 2.500mAh above
Main Changelog from Chimera7 to Chimera7 Pro:
SucceX-D F7 V2.2 Stack (F7+50A ESC) upgraded to BLITZ F722 Stack (F7 V1.1 + 55A 4in1 ESC)
New Lightweight Side Panels Design - Keep Your Rig Clean
XING 2806.5 upgraded to XING2 2809 1250KV
7-inch frame upgraded to 7.5inch
HIGHLIGHTS:
Smooth and Powerful XING2 Motors
The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection.
Latest Chimera7 Pro Frame for Maximum Protection
The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.
GPS pre-installed
For more safety at a distance.
PRE-TUNED & PRE-SETUP:
Is this your first BNF or are you just starting through with FPV? This article might probably help: General Guide // iFlight BNF
Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"
GPS Rescue is OFF by default to prevent unwanted or unexpected drone behavior.
Please check our linked article on"GPS Rescue Mode // Setup"
Specifications:
Product Name: Chimera7 Pro 6S HD
FC: BLITZ F722 Flight Controller
ESC: BLITZ E55 4-IN-1 2-6S 55A ESC
Video Transmission: RUNCAM LINK Wasp
Frame: 345mm wheelbase
Motor: XING2 2809 motors
Prop: 7.5X3.7X3 propellers
Weight:695grams
Model:Chimera7 Pro
Takeoff Weight:Approx. 750g
Dimensions (L×W×H):180×180×80 mm
Diagonal Distance:120 mm
Max Ascent Speed:6 m/s (Normal Mode, Sport Mode)
Max Descent Speed:6 m/s (Normal Mode, Sport Mode)
Max Speed:27 m/s (Manual Mode)
Maximum Takeoff Altitude:5000 m
Max Hover Time:Approx. 18 mins
Max Flight Distance:11.6 km
Max Wind Speed Resistance:10.7 m/s (Level 5)
Operating Temperature Range:-10° to 40° C (14° to 104° F)
Transmission Power (EIRP):FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm
Antennas:Dual Antennas
GNSS:GPS + Galileo
Video Transmission
Product Name: RUNCAM LINK Wasp
FPV Cam :RunCam Wasp
Runcam Link: L19mm*W19mm*H19mm
FPV Cam: L29mm * W29mm * H13mm
Communication Frequency: 5.725-5.85GHz
Transmission Power (EIRP): FCC/SRRC/MIC: <20dBm; CE: <14dBm
Input Volts:14-26.4 V
Weight: 23.5 g
Image Sensor: 1/3.2”
Resolution: 720P@120fps
LENS: FOV D:155° H:125° V:96°
Coaxial Cable: 120 mm
Audio Transmission:Yes
Chimera7 Pro HD BNF Included Components and Parts
1 x Chimera7 Pro 6S HD
1 x Battery pad
2 x 7 inch Prop(Pairs)
2 x Battery strap
1 x Screw bag
Note:
All iFlight BNFs are tested before shipment to guarantee the highest quality.
If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.
iFlight takes no responsibility for issues with DJI or Caddx 3rd party gear (Video transmitters, Goggles, Radios, etc) and must be directly reported to www.caddxfpv.com/pages/contact-us or www.dji.com/support.