iFlight Mach R5 HD FPV Drone - 215mm 5inch 6S FPV BNF with Caddx Polar Vista Digital HD System / Beast F7 55A AIO board / XING2 2506 1850KV

• In response to our customer needs, this is our answer for all the racers in out there: The iFlight Mach R5 BNF!
• Equipped with XING2 2506 motors for more torque and efficiency as well as high speed and consistent lap times.
• We use Beast F7 55A AIO, the most powerful of our iFlight AIOs available currently.
• Quick-swap arm assembly for easy repair on your flying spot or race day.
• Enhanced canopy design with low wind resistance for maximum speed and efficiency.

• Super durable design, 6mm arms and 7075 CNC middle plate
• Super lightweight but superpower with our newest XING2 2506 motors
• 55A powerful Beast AIO power at small footprint
• New Caddx Polar Vista Digital HD System

• XING2 2506 1850KV motors
• Beast F7 55A AIO board
• Caddx Polar Vista Digital HD System Kit

• Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
• To restore lost tunes or updates, please check our linked article on"Firmware/Factory Dumps"
• Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
• Please check our linked article on"How to disable Angle-Mode, activate Acro-Mode"
• GPS Rescue is OFF by default to prevent unwanted or unexpected drone behavior.
• Please check our linked article on"GPS Rescue Mode // Setup"

• Wheelbase: 215mm
• Main body dimension: 152*152mm
• Arm thickness: 6mm
• Bottom plate thickness: 3mm
• Top plate thickness: 2.5mm
• Middle Plate thickness: 2.5mm CNC 7075 aluminum alloy
• TPU Camera plate
• FC: 30.5*30.5/25.5*25.5mm/20*20mm
• FPV Cam:14mm /19mm Micro / 20mm

• MCU: BGA-STM32F745
• Gyro: MPU6000
• Blackbox: 16Mb Onboard Flash
• BEC output: 5V 2.5A
• Barometer: DPS310
• Connector: Micro-USB
• OSD: AT745E
• FC Firmware：IFLIGHT_F745_AIO
• Mounting pattern: 25.5*25.5mm φ3mm
• Dimensions: 32.5*32.5mm
• Weight: 8.5g

• UARTs: 5
• Current Sensor: Yes
• Input: 2-6S LIPO
• Current scale: 200
• Constant: 55A / Burst: 60A
• BLHeli: BLHeli-S
• Telemetry: no
• ESC Firmware:BlheliS G-H-30 BLS
• Mounting pattern: 25.5*25.5mm/Φ3mm
• Dimensions:32.5*32.5mm

• Prebuilt and tested Quadcopter
• 1x Mach R5 HD Frame
• 1x Caddx Polar Vista Digital HD System Kit
• 1x Sigma LHCP Ipex/UFL5.8g antenna
• 2sets x Nazgul R5 3-blades (Set of 4 - Color may vary)
• 1x20*250mmMicrofiber PU Leather Battery Strap (Color May Vary)

Mach RS O Bor Foy Racmg C Quick-swap High strength 7075 Up to High quality arms aluminum base 20Okmlh lectronic

Born for Racing: Designed with the highest standards in mind, this product is ideal for racing or competitive use, offering both analog and high-definition (HD) options.

The Mach R5 has the following technical specifications: model wheelbase dimensions are 152mm, while the actual model size is 215.2mm. The layout is built with an X-geometry, weighing approximately 321g (analog) or 325g (HD). The inner installation height of the motor pattern is 25mm, and the motor center hole is 16*16mm.

The iFlight Mach R5 HD FPV drone comes with a setup that includes a Beast F7 55A AIO board, SucceX-D Mini F7 TwinG ESC, and a Caddx Polar Vista digital HD system. The specifications are: 215mm (8.5 inches) in length, 6S configuration, and a 2506 motor with an 1850KV rating.