Matek System Video Transmission Receiver Antenna 1.2/1.3ghz Ant-y1240/VTX/VRX For RC FPV Drone Aircraft Helicopter Model Parts

VRX-1G3-V2:

Project specifications (specifications)

Band 1060-1380MHz

Channel Customers 9

Channel frequency 1080/1120/1160/1200/1240/1280/1320/1360/1258 (MHz)

Audio subcarrier 6.5MHz/6.0MHz

Modulation type frequency modulation

Frequency controlled phase-locked loop

Audio subcarrier controlled phase-locked loop

Frequency stability ± 100KHz (typical value)

Frequency accuracy ± 200KHz (typical value)

A/V ratio -26 ± 2dB

Signal to noise ratio (Fo ± 3MHz)>70dBc

Channel carrier error 1dB

Antenna port impedance (50 ohms)

Input format NTSC or PAL

Video input level range: 1V ± 0.2vp-p type

Audio input level range: 1V ± 0.2vp-p type

Working temperature -10 ℃~+60 ℃

DC 7-28v input power supply

Power output (output voltage) DC7.28V; DC5V

Outline dimensions 45.5mm (L) * 35.8mm (W) * 8.4mm (H)

Installation hole position 30.5mm x 30.5mm

Net weight 10 grams

VTX-1G3SE

DC characteristics

Power supply voltage 5.0V

Current consumption (280 ± 40) mA

Environmental regulations

Working temperature -10~+65 ℃

Storage temperature -30~+85 ℃

Working humidity 85% RH

Radio Frequency (RF)

Receiving frequency range 1050~1380MHz

*Input voltage standing wave ratio 2:1

FM/PLL demodulation system

Intermediate frequency IF 480MHz

ANT. Input impedance 50 Ω, typical value LO frequency stability ± 200kHz

LO frequency accuracy ± 200kHz

LO control PLL

Input LO leakage -65dBm

Receiving sensitivity -95dBm

Input level range -95 dBm to+5 dBm

Video Features

Video output impedance 75 Ω, typical video output level 1Vp-p, typical video polarity negative

Video frequency response ± 5 decibels, maximum 50 Hz~6 MHz

Differential gain ± 5%, maximum value

Differential phase ± 5 degrees, maximum

3dB IF broadband 16.5MHz

Signal-to-noise ratio S/N 38dB, Min

RSSI output voltage (-30dBm~-90dBm) 1.3-0.7V

audio frequency

Audio output

Contact us:

If you need to place a large order, you can contact us for a lower discount. And you have any questions or need help, please feel free to contact us. We will do our best to provide support.

This video transmission receiver supports HDMI and HDCP protocols, with a maximum pixel clock speed of 165MHz, compressed format H.264, and maximum video resolution of 1920x1080 at 60Hz. The HDMI connector is type-A with an impedance of 1000 ohms, and we recommend using cables shorter than 5 meters when transmitting at the maximum resolution. Additionally, this device features a 3.5mm IR port with unidirectional digital IR transmission frequency ranging from 20-60 kHz.