BETAFPV Meteor75 Pro P1 Brushless Whoop Quadcopter w/ P1 Air Unit 1080P@60fps, ELRS 2.4G

Overview

The BETAFPV Meteor75 Pro P1 Brushless Whoop Quadcopter integrates the P1 Air Unit HD VTX for HD FPV, combining 1080P@60fps live video (~60ms latency) with the Matrix 1S 3IN1 HD FC, 1102 | 22000KV motors, and GF/Gemfan 45mm 3-blade propellers. It is designed for a balanced setup with a stated flight time of 5:30 using the recommended LAVA II 1S 580mAh/680mAh battery.

Key Features

• P1 Air Unit HD VTX: 1080P@60fps HD video, ~60ms latency, transmission power 200mW, transmission range >5km.
• P1 camera imaging: 1/2.9 inch CMOS sensor and 170° field of view.
• Matrix 1S 3IN1 HD FC integration: FC + ESC + Serial ELRS 2.4G RX in one unit; tailored for 1S HD whoops.
• ESC/BEC details (Matrix 1S 3IN1): 12A continuous / 18A peak current ESC; new BEC 5V 3A; IMU-independent LDO power supply.
• MCU: STM32C473CEU6.
• Connector: SH1.0-6Pin connector for simplified setup.
• Power system: 1102 | 22000KV motors + GF 45mm 3-blade props + continuous 12A ESC.
• Micro canopy for HD camera: 2.5g; adjustable camera angle 0°–45°.
• Bind & Fly ready: Compatible with VR04 HD FPV goggles.

For compatibility questions (firmware, goggles, or radio binding), contact support@rcdrone.top or visit https://rcdrone.top/.

Specifications

ArtLynk Protocol & Firmware Compatibility Notes

• ArtLynk is described as a low-latency, long-range communication protocol for FPV, and the BETAFPV P1 HD VTX is part of an open ecosystem that can support equipment such as goggles, receivers, and whoop drones from various manufacturers.
• Artosyn inside & KAP supported: Uses the Artosyn AR803X chipset with KAP core technology support.
• Firmware compatibility: For compatibility with third-party ArtLynk equipment, BETAFPV devices should be updated to firmware version V2.0.5 or later. Firmware V2.0.5 is not compatible with V1 versions (V1.0.36 / V1.0.44).

Firmware update video: how to update the firmware.

Recommended Parts

• Battery: LAVA II 1S 580mAh/680mAh
• FC: Matrix 1S 3IN1 HD FC
• Motor: 1102 | 22000KV brushless motor
• Props: Gemfan 45mm 3-Blade Propellers (1.5mm shaft, 4PCS)
• VTX: P1 Air Unit
• Frame: Meteor75 Pro Brushless Whoop Frame
• Goggles: VR04 HD FPV Goggles
• Radio Transmitter: LiteRadio 3 Pro / LiteRadio 3 / LiteRadio 2 SE
• Canopy: Micro Canopy for HD Camera

Files

• FC firmware and CLI dump file

What’s Included

• 1 x Meteor75 Pro P1 Brushless Whoop Quadcopter
• 4 x GF 45mm 3-Blade Propellers
• 1 x Type-C to SH1.0 Adapter
• 1 x SH1.0-4Pin Adapter Cable
• 4 x M1.4*4 Phillips Flat Head Screws
• 3 x Decorative Parts
• 1 x User Manual for P1 Air Unit

Applications

• HD FPV flying with the P1 Air Unit (1080P@60fps live video)
• Indoor whoop practice and recreational flying
• Lightweight HD capture and smooth flight setups on 1S power

Details

The Meteor75 Pro P1 brushless whoop pairs a P1 Air Unit with a Matrix 1S 3-in-1 FC, 1102 22000KV motors, and a micro HD canopy.

BETAFPV ArtLynk System P1 HD VTX pairs a compact camera and VTX board for 1080p@60fps HD video with low-latency transmission.

A BETAFPV FPV flight captures smooth low-altitude passes over open grass with trees and nearby buildings.

The BETAFPV Matrix 1S 3-in-1 flight controller integrates FC, ESC, and 2.4G ELRS receiver with an SH1.0 6-pin connector for simpler wiring on 1S HD whoops.

BETAFPV’s compact ducted whoop build is paired with 1102 22000KV motors, 45mm 3-blade props, a 12A ESC, and LAVA 1S 580/680mAh batteries.

This BETAFPV micro canopy provides a lightweight, durable mount designed for an HD camera on compact FPV builds.

The BETAFPV VR04 HD FPV goggles pair with a compact ducted micro quad for an easy bind-and-fly FPV setup.

BETAFPV ArtLynk Protocol gear pairs a compact receiver board with a matching FPV camera and antenna for an integrated video link setup.

The BETAFPV Meteor whoop package includes the ducted micro quad along with spare propellers, mounting screws, and small accessories for setup.