Ovonic Racing Series 6S 1400mAh 22.2V 150C LiPo Battery XT60, JST-XHR-7P for 5-6in FPV Drones

Overview

Ovonic 150C Racing Series 6S 1400mAh 22.2V LiPo battery with XT60 plug is designed for 5–6 inch FPV racing and freestyle drones where fast throttle response and compact sizing are required. The pack uses a 6S1P configuration and is specified at 150C discharge rate, with a compact footprint of 76.6 x 38.7 x 40 mm (3.02 x 1.52 x 1.58 in) and an approximate weight of 227 g (0.45 lb).

Key Features

• 150C discharge rate for high-output FPV racing and freestyle power demands.
• Compact size and weight: 76.6 x 38.7 x 40 mm (3.02 x 1.52 x 1.58 in), approx. 227 g (0.45 lb).
• XT60 main connector and JST-XHR-7P balance connector for typical 6S charging/balancing setups.
• 12 AWG wire gauge specified for the main leads.
• Ovonic “Stacking Technology” (manufacturer-stated) vs winding technology: higher energy density (+6%), longer running time (+12%), lower battery swelling (-8%), and lower internal resistance (-4%).

Specifications

What's Included

• 1x Ovonic 150C Racing Series 6S 1400mAh 22.2V LiPo Battery (XT60)
• 2x Brand stickers
• 1x User manual
• 1x Packaging box

Applications

• 5–6 inch FPV drones
• 180–330 mm brushless FPV drones
• Example compatibility mentioned: GEPRC MARK5/MARK4, Crocodile5 Baby, DJI FPV, Nazgul5, TITAN XL5, Chimera5, Evoque F5D/F5X
• Also referenced for use across RC models where voltage, dimensions, and plug type match (airplane, boat, car, truck)

Notes

1. Ensure compatibility with both voltage and plug specifications, and confirm the battery dimensions fit the frame/battery mount.
2. Stop charging at 4.2V per cell (normal voltage range: 3.7V~4.2V).
3. Inspect the battery condition before each use.
4. If a new battery does not hold a full charge or loses charge rapidly, use a balance charger and cycle it several times.

For product selection, compatibility questions, or after-sales support, contact https://rcdrone.top/ or email [email protected].

Details

A compact 6S 1400mAh pack built for 5–6 inch FPV drones, with XT60 power lead, JST-XHR-7P balance plug, and 12 AWG wiring.

Manufacturer-stated stacking technology targets higher energy density and longer runtime, while helping reduce swelling and internal resistance.

A quick visual comparison of performance factors Ovonic highlights versus standard packs.

Match voltage, dimensions, and connector type to your build—commonly used on FPV drones and other RC applications where specs fit.

Includes the 6S 1400mAh battery plus the retail box, user manual, and two Ovonic brand stickers.