OVONIC 2S 7.4V 8000mAh 50C Hardcase LiPo Battery Pack w/ Deans (T) Plug for 1/10 RC Car

Overview

The OVONIC 2S LiPo battery pack is a 7.4V, 8000mAh hardcase battery designed for 1/10 scale RC car, RC truck, and RC buggy applications. It features a 50C discharge rating, Deans (T) discharge plug, and a JST-XHR balance connector.

Key Features

• 2S LiPo (2S1P) hardcase battery for RC vehicles
• Capacity: 8000mAh
• Nominal voltage: 7.4V
• Discharge rate: 50C; max burst discharge rate: 100C
• Discharge plug: Deans (T) plug
• Balancer connector: JST-XHR

Specifications

What's Included

• 1 x Ovonic 50C 7.4V 8000mAh LiPo 2S Battery Pack (Deans/T plug)
• 1 x User Manual

Applications

• 1/10 scale RC cars
• Compatible examples (as referenced): Losi SCTE 4x4 & 2.0, Traxxas Slash / Slash 4x4, Bandit, Rustler, Stampede / Stampede 4x4, E-Maxx, Monster Jam Replicas

Usage Notes

1. Fitment depends on matching both voltage and plug type with the RC model/ESC.
2. Stop charging immediately when any cell reaches 4.2V (normal cell voltage is between 3.7V and 4.2V).
3. Check the battery surface condition and verify voltage is normal before first use.
4. If a new battery does not hold a full charge or loses charge quickly, use a balance charger and cycle it several times.

For help choosing the correct connector or charger setup, contact support at https://rcdrone.top/ or email [email protected].

Details

Built for 1/10 scale RC cars and trucks, the 2S 7.4V hardcase pack delivers 8000mAh capacity with a 50C discharge rating.

A Deans (T) discharge plug pairs with a JST-XHR balance connector for common RC charger and ESC setups.

Check fitment before ordering: 139 × 47 × 25 mm hardcase size for many 1/10 battery trays.

Ideal for a wide range of 1/10 scale RC platforms—match voltage and connector type to your vehicle and ESC.