OVONIC 2S 7.4V 5000mAh 50C Hardcase LiPo Battery Deans T + JST-XH, for 1/10 HPI RC Car
OVONIC 2S 7.4V 5000mAh 50C Hardcase LiPo Battery Deans T + JST-XH, for 1/10 HPI RC Car
Ovonic
Couldn't load pickup availability
Overview
The OVONIC 2S LiPo battery is a 7.4V 5000mAh pack with 50C discharge, supplied with a Deans (Deans T) discharge plug and a JST-XH/JST-XHR-3P balance connector. It is intended for RC car use such as HPI Racing 1/10 scale models, where battery voltage and connector type must match the vehicle ESC and battery tray.
Key Features
- 2S (2S1P) LiPo (Li-polymer) battery configuration
- 50C discharge rate (max burst discharge rate listed as 100C in the provided specs)
- Deans / Deans T discharge connector
- Balance connector listed as JST-XH (also shown as JST-XHR-3P on the product graphic)
- Product graphics also list: +12% longer running time, -5% lighter weight, -4% lower resistance, and “ISO International Quality Certification”
- Product graphics list advantages: long cycle life, faster charging time, higher discharge capacity, higher performance in power, high rate discharge current
Specifications
| Brand | Ovonic |
| Chemistry | Li-polymer (LiPo) |
| Cell count / configuration | 2S (also shown as 2S1P) |
| Nominal voltage | 7.4V |
| Capacity | 5000mAh |
| Discharge rate | 50C |
| Max burst discharge rate | 100C (listed in provided specs) |
| Discharge plug | Deans Plug (also shown as Deans T) |
| Charge/balance plug | JST-XH (also shown as JST-XHR-3P) |
| Battery weight | 273g (dev.20g) (provided specs); 297g / 0.59lb (product graphic) |
| Battery dimensions | 139 x 46 x 25mm (provided specs); 137 x 24 x 45mm / (5.3 x 0.9 x 1.7inch) (product graphic) |
| Wire length | 115mm (provided specs) |
| Case | HardCase (product title); Soft Case (product graphic) |
Compatibility / Applications
Stated compatibility includes popular RC car model brands such as Axial, TRA, HPI, and Redcat. The provided list includes:
- TRA 1/10 Scale E-Maxx Brushless Monster Truck
- TRA 1/10 Scale Bandit Electric Buggy
- TRA 1/10 Scale Rustler version Electric Stadium Truck
- TRA Slash 2WD | RC Truck 1/10 | Short Course RC Truck
- TRA E-Revo 16.8V Dual Motor 4WD Monster Truck RTR
- TRA TRX-4 | Scale & Trail Crawler
- Axial SCX10 truck, SCX 10 II, 2WD SC10 brushless Truck
- Redcat Racing 1/10 Everest Gen7 Pro 4WD Crawler Brushed RTR
Product graphics also state “Universal Compatibility” for professional 1/10 scale and 1/8 scale RC car hobby models such as: Traxxas Slash, Emaxx, Bandit, Rustler version, Losi, Team Associated, etc.
What's Included
- 1 x Ovonic 50C 7.4V 2S 5000mAh LiPo battery with Deans plug
- 1 x User manual
For connector/fitment questions before purchase, contact [email protected] or visit https://rcdrone.top/.
Charging & Use Notes
- For an RC battery, it will fit only if the voltage and the plug match.
- Stop charging immediately when the cell voltage reaches 4.2V (normal cell voltage is between 3.7V and 4.2V).
- Check that the battery surface is in good condition and that the voltage is normal before use.
- If a new battery will not hold a full charge or loses charge quickly, use a balance charger and recycle several times first.
Video
Details
Power a 1/10-scale RC truck with a 2S 7.4V LiPo pack designed for dependable run time and punch.
Check battery tray size and connector type to ensure a clean fit and easy hookup to your ESC.
Specs at a glance: 2S (7.4V) 5000mAh with a Deans/T-style discharge connector and a JST-XH/XHR 3-pin balance lead.
High-discharge construction is built for responsive acceleration and consistent power delivery in RC car setups.
Connector match and physical dimensions matter most—verify both before ordering for 1/10 or 1/8 RC car applications.
Dimensions and plugs are labeled to help confirm fitment: Deans/T discharge plug plus a 3-pin JST balance connector.
What arrives in the box: the battery pack with documentation and branded packaging.
Related Collections
