Overview

QUESCAN G10A-F30 GNSS module is based on the UBX-M10050-KB chip, which is part of the M10 standard precision GNSS platform, provides exceptional sensitivity and acquisition times for all L1 GNSS systems.The extremely low power consumption in continuous tracking mode allows great power autonomy for all battery-operated devices, such as asset trackers, without compromising on GNSS performance .
In the firmware described here(M10 SPG 5.10),the UBX-M10050-KB supports concurrent reception of up to four GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes the position accuracy, in particular under challenging conditions such as in deep urban canyons. u-blox Super-S (Super-Signal) technology offers great RF sensitivity and can improve the dynamic position accuracy by up to 25% with small antennas or in a non-line-of-sight scenario.
G10A-F30 has a built-in flash memory, which supports modifying the module configuration.

The default GNSS receiving mode of G10A-F30 module is GPS+Galileo+BeiDou+QZSS+SBAS.

SPG 5.10 firmware also supports the BeiDou B1C signal with lower power consumption rate,which can work with either one of these signal types at a time,so you can set GNSS receiving mode to GPS+Galileo+BeiDou(B1C)+GLONASS+QZSS+SBAS.

Some BeiDou B1C related values are not correctly reported in NMEA GBS message, they are reported with incorrect signal ID value 0. NMEA GSV and GRS messages do not support BeiDou B1C signals, the C/N0 level and residual data are not reported at all.
Workaround: Use UBX-NAV-SAT message to obtain the C/N0 and residual data for BeiDou B1C signals.