Overview
Radiolink RTK F9P is a high-precision centimeter-level GPS module featuring the ublox F9P module, a zero-loss PCB antenna feeder, and a low-noise circuit design. With built-in iSentek IST8310 geomagnetic chip, support for BDS/Galileo/GLONASS/GPS/QZSS satellite systems, and 20Hz RTK update rate, it offers sub-10s convergence time and ±1cm+1ppm positioning accuracy. The module includes Type-C, UART, USB, I2C interfaces for compatibility with mainstream drones and supports RTK mode switching in 10s, ideal for agriculture, surveying, inspection, delivery, and UAV navigation systems.
Key Features
-
ublox F9P RTK Module: High-performance GNSS positioning with concurrent reception of 4 satellite systems.
-
Zero-loss PCB Antenna Feeder: Minimizes RF signal loss; impedance precisely calibrated using a network analyzer.
-
Low-noise Power Design: Built with 3PEAK TPL910A LDO for output ripple as low as 4.5uVrms.
-
iSentek IST8310 Geomagnetic Chip: Embedded compass for drone flight stabilization and heading control.
-
Multiple Interfaces: 2×UART, 1×USB, 1×I2C (shared with UART1), Type-C for configuration and firmware upgrades.
-
RTK 20Hz Update Rate: Provides real-time, high-frequency centimeter-level position updates.
-
RTK Convergence Time <10s: Quickly switches between modes, reducing mission delays.
-
Complete Protection: TVS and ESD tubes on antenna/data ports ensure electrical safety and reliability.
Technical Specifications
| Specification | Detail |
|---|---|
| Satellite Receiver Type | RTK120 |
| GNSS Systems | BDS / Galileo / GLONASS / GPS / QZSS |
| Supported Bands | GPS: L1 C/A, L2C GLONASS: L1 OF, L2 OF Galileo: E1B/C, E5B BeiDou: B1I, B2I QZSS: L1 C/A, L2C |
| Concurrent Systems | 4 |
| Update Rate | RTK 20Hz |
| Accuracy | RTK ±0.01m + 1ppm CEP |
| Convergence Time | <10 seconds |
| Start Time | Cold Start: 24s Aux Start: 2s Hot Start: 2s Recapture: 2s |
| Sensitivity | Tracking: –167dBm Cold Start: –143dBm Hot Start: –157dBm Recapture: –160dBm |
| Anti-interference | Active CW detection, onboard filtering |
| Security | Advanced anti-spoofing algorithm |
| Interfaces | 2×UART, 1×USB, 1×I2C (shared with UART1), Type-C |
| Time Pulse Output | Configurable: 0.25Hz – 10MHz |
| Protocols | NMEA, UBX Binary, RTCM 3.x |
| Input Voltage | 4.5V – 6V |
| Operating Temp | –40°C to +85°C |
| Dimensions | 49×31.6×9.6mm (1.93”×1.24”×0.38”) |
| Weight | 22g (0.78oz) |
RTK System Package Options
📦 RTK Base + Rover Kit
-
2 × Radiolink RTK F9P Module
-
1 × ANT-B10 Base Station Antenna
-
1 × ANT-M7 Rover Antenna
-
2 × Antenna Cables
-
1 × Type-C Cable
📦 RTK Base Station Kit
-
1 × Radiolink RTK F9P (Base Receiver)
-
1 × ANT-B10 Base Station Antenna
-
1 × ANT-B10 Antenna Cable
📦 RTK Rover Kit
-
1 × Radiolink RTK F9P (Rover Receiver)
-
1 × ANT-M7 Rover Antenna
-
1 × Antenna Cable
📦 Full Autonomous Navigation Control System for Agricultural Machinery
Includes:
-
RTK F9P (Base + Rover) ×2
-
ANT-B10 and ANT-M7 Antennas
-
Power Module, Buzzer, Storage Card
-
Safety Switch, USB & Type-C Cables
-
Wiring Harness, Mounting Tape, and more
Details

Radiolink RTK F9P GPS receiver with ublox F9P module, zero-loss PCB antenna feeder, low-noise circuit design, built-in geomagnetic chip, complete interface, and all-round protection.

Radiolink RTK F9P Centimeter-Level GPS module. Utilizes Ublox F9P, best-performance industry RTK module, for precise positioning.

Zero-loss PCB Antenna Feeder ensures precise GPS with minimal signal loss for accurate drone positioning.

Low-noise Circuit Design. Using 3PEAK LDO TPL910A, output voltage ripple is 4.5uVrms. Digital-analog circuit isolation PCB routing ensures perfect F9P performance. Graphs display log magnitude response.

Built-in Geomagnetic Chip. Features isenTEK IST8310, mainstream geomagnetic chip for drone flight controller. Includes u-blox ZED-F9P-01B-01 GPS module for centimeter-level accuracy.

Radiolink RTK F9P Centimeter-Level GPS has a compact 31.6mm x 49mm design with USB, two UART ports, and I2C interface. It includes UART1/I2C, antenna port, Type-C upgrade, power LED, UART2, and RTK LED. Built to fit mainstream drone interfaces, it delivers precise positioning for advanced high-accuracy GPS applications.

All-Round Protection Design: antenna end features TVS and ESD protection; data interface includes ESD tubes for RTK receiver, BaseStation, and Rover safety. Works as a Rover with PIX6 module or as a Base Station with monitor display. Details on RTK Rover ANT-M7 and base station antenna ANT-B10 included. Ensures reliable, precise GPS performance.

Radiolink RTK F9P GPS system with PIX6 module. Switch RTK mode in 10 seconds, update rate up to 20Hz, reducing positioning errors effectively.

Cost-effective Radiolink RTK kit for precise positioning in agriculture, surveying, and drone operations. Supports 90-degree steering and high-precision control within mobile station range.

Use Guarantee ensures all Radiolink models' functions are reanalyzed and retested. FAQ, usage guidance available on official website, social media platforms for easy access and support.

RTK120 GPS receiver supports multiple GNSS systems, offering 20Hz update rate, 0.01m+1ppm CEP accuracy, and <10s convergence time. Features include anti-interference, advanced security, and multi-star antenna. Operates at -40°C to +85°C.

Radiolink RTK F9P packing list includes: RTK F9P receiver, packing bag. Recommended packages: Radiolink RTK Base Station Kit with ANT-B10 antenna and connect cable.

Radiolink RTK F9P kit includes: 2 RTK receivers, 1 basestation antenna, 1 rover antenna, 2 connect cables, and 1 Type-C cable for upgrades and parameters.

Radiolink RTK F9P kit includes PIX6 flight control, RTK receivers, antennas, cables, power module, buzzer, safety switch, 4G TF card, and various port connect cables for comprehensive GPS functionality.
Related Collections

Explore More Drones & Accessories
-
Camera Drone
Our Camera Drone Collection features a wide range of brands including FIMI,...
-
Drone Accessories
Discover a wide range of drone accessories to enhance flight performance, extend...