reComputer J4011B Edge AI Computer, NVIDIA Jetson Orin NX 8GB, 128GB NVMe, USB3.2, HDMI, GbE (Super Mode Not Supported)

Overview

reComputer J4011B is an Edge AI Computer built on the NVIDIA Jetson Orin NX 8GB module. It combines compact size with rich I/O for development and deployment, including 2x USB 3.2, HDMI, Gigabit Ethernet, M.2 Key E for Wi‑Fi module, M.2 Key M for SSD, mini‑PCIe for LTE module, CAN, and a 40‑pin header. It comes with a pre‑installed 128GB NVMe SSD and JetPack 5.1.3 (Linux OS BSP ready). Note: Super Mode NOT Supported.

Key Features

• Build a powerful embedded AI platform: compatible with Jetson Orin NX modules, offering up to 100 TOPS.
• Designed for development and production with extensive I/O: 2x USB 3.2, HDMI, Ethernet, M.2 Key M, M.2 Key E, mini‑PCIe, 40‑pin GPIO, and CAN.
• Supports multiple wired and wireless communications including Wi‑Fi and LTE (modules require additional purchase).
• Pre‑installed JetPack 5.1.3, Linux OS BSP ready for immediate go‑to‑market.
• Compliance: RoHS, CE, FCC, KC, UKCA, REACH; production lifetime until at least 2032.
• From hardware diagram: 2x MIPI‑CSI (2‑lane 15‑pin) camera connectors, Control & UART header, fan header (5V PWM), 40‑pin expansion header (GPIO/I2C/UART), 260‑pin SODIMM, USB Type‑C (Device Mode), power LED, DC 9–19V 5525 jack, SIM card slot (for LTE), and an optional PoE backpower header.

Specifications

Hardware Overview

Application

• Smart Lamppost: monitor traffic with sensors and transmit data for better traffic control. Integrate solar power, store energy for night use, and may feed excess power to the grid.
• EV Battery Swapping/Charging System: charging stations connected to the smart grid optimize charging times; battery swapping eases EV range anxiety.
• Smart Recycling Center: sensors in bins reduce waste collection trips; equipment runs during off‑peak hours; recycled materials can be used for smart grid and EV components.

Documents

• Datasheet
• Carrier Board Schematic
• LTE board Schematics
• Seeed NVIDIA Jetson Product Catalog
• NVIDIA Jetson Product Comparison
• Seeed NVIDIA Jetson Success Cases
• Seeed Jetson One Pager

ECCN/HTS

Part List

Details

Control and UART Header, M.2 Key E, CAN Header, RTC 2-pin Socket, Fan Header LO-pin Expansion Header with GPIO, I2C, and UART. MIPI-CSI Camera Connectors (2x), 260-Pin SODIMM, M.2 Key M. Optional PoE Backpower Header, Power LED, DC Power Jack, USB Type-C, HDMI, and USB 3.2 Ports (2x). SIM Card Slot, Mini-PCIE for LTE Module, and Gigabit Ethernet Port.

Smart lamppost with cameras, sensors, and LED display