F7 AIO Flight Controller Details
BLE Module Integrated 0 configuration
Throttle Disarmed, the Bluetooth module will activate automatically
MCU | STM32F722 |
IMU | ICM20689 |
Baro | BMP280 (I2C) |
OSD | BetaFlight OSD w/ AT7456E chip |
Bluetooth Module | Built-in. Please enable MSP for UART 3 and set the baud rate to 19200. |
BlackBox | 32MB onboard dataflash |
Current Sensor | 200A(Scale 102) |
BetaFlight Camera Control Pad | Yes |
Power input | 3s - 6s Lipo |
Power output | 5V *5(Including BZ+), the maximum load current is 2.5A. 9V * 1, the maximum load current is 2.5A. |
ESC power output | 4 * VCC output |
UART | UART Pads * 4(UART1, UART2, UART4, UART5) |
RSSI input | RSSI input solder pad |
SmartPort | Use Softserial1 to support SmartPort |
Support Flight Controller Firmware | Betaflightbeta, iNav(Coming soon) |
I2C | Used for external Magnetometer, Sonar, etc. |
Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
ESC signal | S1 - S5 |
LED pin | Used for WS2812 LED |
Boot button | Used to easy enter DFU mode |
Weight | ≈8.8g |
Dimension | 36.5 * 44 * 7mm |