SpeedyBee F7V2 Specifications
MCU | STM32F722 |
IMU | MPU6000 |
USB | Type-C |
Barometer | BMP280 (I2C) Warning:Do not apply conformal coating on the berometer because the air hole can be clogged. |
OSD | BetaFlight OSD w/ AT7456E chip |
BLE | Support, used for Flight Controller configuration |
WiFi | Support, used for data transfer, e.g firmware flashing, and Blackbox analysis. |
DJI Air Unit slot | A full DJI Air Unit JST slot onboard |
BlackBox | 16MB onboard dataflash |
Current Sensor | 1 : 10 (Scale 168) |
BetaFlight Camera Control Pad | Yes |
Power input | 3-6S |
5V BEC x 1 | 5V output x 7 , 6 pads, and a BZ+ pad used for Buzzer, the maximum load current in total is 2.5A. |
9V BEC x 1 | 9V output x 2 , 1 pad and another one used for DJI slot, the maximum load current in total is 2.5A. |
4.5V power output | 1 * 4.5V output pad |
3.3V power output | 1 * 3.3V output pad, the maximum load current is 500mA. |
ESC signal | M1 - M4 |
UART | Full UART * 5(UART1, UART2, UART3, UART5, UART6) |
ESC Telemetry UART | UART4 RX |
I2C | Used for external Magnetometer, Sonar, etc. |
LED pin | Used for WS2812 LED |
Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
Boot button | Used to easy enter DFU mode |
RSSI input | RSSI input solder pad |
SmartPort | Use any TX pad of UART for the SmartPort feature. |
Support Flight Controller Firmware | BetaFlight(Default), EMUFlight |
Target name | SPEEDYBEEF7V2 |
Mounting | 30.5 x 30.5mm, 4mm hole size |
Dimension | 41 x 38 x 6.9mm |
Weight | 9g |
SpeedyBee BLHeli32 45A 4 in 1 ESC Specifications
Firmware | BLHeli32 SpeedyBee 4in1 |
Continuous Current | 45A * 4 |
Burst Current | 55A(10S) |
ESC Protocol | DSHOT300/600/1200 |
Power input | 3-6S Note: Strongly recommended to solder the filtering capacitor between VBAT"+" and" -" |
Power output | VBAT |
Current Sensor | Support (Scale 168) |
ESC Telemetry | Support |
Mounting | 30.5 x 30.5mm, 4mm hole size |
Dimension | 41 * 45 * 6.5mm |
Weight | 12.5g |
Supported Motor | 1900KV or below should be needed for 6S |
Details
DShot in Betaflight. To use the bidirectional DShot feature, make sure to upgrade to Rev32.9 firmware.
V22 ESC doesn't have the issue.
Learn more
SpeedyBee F7 V2 BL32 45A Stack with V22 ESC. GYRO LPF (PTT) dynamic cutoff 200-500Hz. GYRO LPF-Z (PTA) cutoff 50Hz. Features include wireless firmware flashing and blackbox analyzer access, PID control, and motor direction setting on BLHeli_32/S wirelessly. Built-in Wi-Fi and Bluetooth for full configuration. Specifications: 773mV @ 1498us, 112mA @ 7146us.
FC Firmware Flasher Step 3/3: Flash the latest firmware wirelessly. Built with WiFi Bluetooth two-in-one chip, upgrade your FC firmware using your smartphone in just 90 seconds. Please don't exit the App otherwise; it will interrupt the flashing process.
SpeedyBee F7 V2 BL32 45A Stack comes with a V22 ESC. This quad allows you to analyze your blackbox data anytime, anywhere. Tune your quad whenever you want and access your flight data on your smartphone in just one minute. No laptop or wires needed. The Blackbox system provides real-time data and statistics for improved flying performance.
SpeedyBee F7 V2 BL32 45A Stack with V22 ESC. Who needs a laptop to change motor directions? Accer Mag Test CPU - broken motor? Solder it up, take your smartphone out and configure your motor direction wirelessly with the latest SpeedyBee app now supporting BLHeli_32 ESCs.
The SpeedyBee F7 V2 BL32 45A Stack features a V22 ESC. Use Bluetooth for quick access to your firmware configurator; or switch to Wi-Fi to flash firmware or download Blackbox data. Simply plug in your LiPo battery to enable wireless connection, and disarm when you're done.
Designed to perfection for the next champion. The SpeedyBee F7 V2 BL32 45A Stack, equipped with a V22 ESC, features 22mm cutouts for an FPV camera on both FC and ESC boards, ideal for compact racing frames. The gyroscope is centered on the board, ensuring accurate gyro data for optimal flights.
Introducing the SpeedyBee F7 V2 BL32 45A Stack with V22 ESC. Whether you're at home or in the field, this quad is ready to go. Configure your newly built quad wirelessly, fine-tune your PIDs, access blackbox data, and adjust other parameters between flights in just a few minutes - all without needing a laptop. With SpeedyBee F7 V2, you can conveniently configure your flight controller using your smartphone.
Real Performance ESC, continuous output: 45A, burst output: 55A, input: 2-6S, features: BLHeli_32, Dshot 600/1200, 21 filtering capacitors
When we say 45A, we mean it: built with the finest components, our latest flagship ESC is nothing but pure performance real 45A output, ready for your biggest 6S motors.
The SpeedyBee F7 V2 BL32 45A Stack features a unique design with 811 via holes, strategically placed to optimize current flow across the board.
Speedy Bee F7 V2 BL32 45A Stack with V22 ESC, featuring 14mm immersion, 30.4mm and 30.4mm pitch, P GRSIVS R8 e6* PWM receiver, ICa SVi TS RaV @id BTANIF @G @EC [41mm x 45.6mm Kc F7 V2 [DG ILIVE Speedy Bee REG 5iVG ud SDAscgv 6 vd8Z+EZAI 38mm x 41mm.
SpeedyBee F7 V2 Flight Controller, SpeedyBee 45A ESC with V22 ESC, BL32 Stack