BrotherHobby Returner 6-12S 32Bit AM32 90A ESC XT V1, XT90PW-M.G.Y, MR60PW, 12V/3A BEC

Overview

The BrotherHobby Returner 6-12S 32Bit AM32 90A ESC XT V1 is an ESC (electronic speed controller) designed for 6-12S power systems, featuring a 32-bit main control chip, telemetry feedback support, and plug-and-play connectors for streamlined installation.

Key Features

• Input power: 6-12S
• 32-bit main control chip
• 8-layer PCB design with 3oz copper thickness
• Built-in PCB filter board; includes two 1000uF/63V high-frequency, low-impedance capacitors to help reduce high-frequency noise and interference
• Large package MOS transistors for continuous high current handling with improved heat dissipation
• Multiple solder mask opening copper strips to increase current carrying capacity and heat dissipation speed
• 6 plug-and-play connectors to reduce soldering steps
• Telemetry feedback: Yes

Specifications

Configuration

Computer end ground station link: https://am32.ca/configurator

What’s Included

• 6-12S 32Bit 90A ESC XT V1
• 24 AWG cable (4 wires)
• 2P signal cable
• Transparent heat shrink tubing
• Packaging: anti-static bag, outer box

For installation or compatibility questions, contact https://rcdrone.top/ or email support@rcdrone.top.

Details

The BrotherHobby Returner 6–12S 32-bit AM32 90A ESC uses an XT connector layout with onboard capacitors for a compact, tidy power setup.

The BrotherHobby Returner ESC uses an 8-layer 3oz copper PCB with built-in 1000uF/63V capacitors, large MOSFETs, and a 32-bit main control chip.

BrotherHobby Returner ESC uses plug-and-play connectors like XT90PW and MR60PW to reduce soldering and speed up installation.

The Returner AM32 90A ESC uses exposed copper strip areas on the PCB to support current handling and heat dissipation.

The BrotherHobby Returner 6–12S 90A AM32 ESC pairs a compact PCB layout with an onboard capacitor bank and a USB-C port for convenient setup.

The Returner 6–12S 90A ESC uses AM32 firmware (2.18), supports PWM/DSHOT 300/600/1200, and lists a 12V/3A BEC.

The 6–12S 32-bit 90A ESC comes with a 24 AWG 4-wire lead, a 2-pin signal cable, and clear heat-shrink tubing for installation.

The Returner 90A ESC layout includes MR60PW and XT90PW connector ends with labeled telemetry, signal, GND, and 12V pads for clean wiring.