BrotherHobby Returner V1 PRO 4-8S 32bit AM32 70A 4-in-1 ESC w/ Telemetry, 30.5x30.5mm

Overview

BrotherHobby Returner V1 PRO is a 4-8S 32-bit AM32 70A 4-in-1 ESC designed for multi-motor setups, with telemetry support for transmitting key running data (motor speed, current, voltage, temperature, etc.) to a remote control or ground station.

Key Features

• Input power: 4-8S
• ESC protocol: PWM / DSHOT 300/600/1200
• Telemetry feedback: Yes
• Current meter: Yes
• 8-layer board design with 2+3OZ copper thickness
• 32-bit main control chip; paired with a stable 6288 driver chip
• 24 high-power MOSFET
• TVS transient suppression diodes: TVS*2
• External capacitor: 1500uF/50V high frequency low resistance filtering capacitor
• Imported SMT filter capacitors
• Equipped with a current detector
• Independent pads for easy soldering

For setup assistance and order support, contact https://rcdrone.top/ or email support@rcdrone.top.

Specifications

Interface Definition

• VCC: Battery voltage detection signal output interface; connect to the flight controller battery voltage detection port; output specification is battery voltage
• GND: Ground wire (negative pole of the power supply)
• CUR: Current detection signal output interface; connect to the flight controller current detection port
• TEL: Telemetry output port
• M1: Throttle signal input interface for No.1 ESC
• M2: Throttle signal input interface for No.2 ESC
• M3: Throttle signal input interface for No.3 ESC
• M4: Throttle signal input interface for No.4 ESC

What’s Included

• 4-8S 32bit AM32 70A 4in1 ESC V1 PRO
• M3*8mm silicone case
• XT60 power line
• SH 1.0mm 8pin 30mm flat cable
• 1500uF/50V high frequency low resistance capacitor
• Packaging: product, anti-static bag, outer box

Software / Links

• Computer end ground station link: https://am32.ca/configurator

Details