BrotherHobby Returner 3-6S 32Bit AM32 65A(4IN1) ESC V3 PRO

Overview

BrotherHobby Returner 3-6S 32Bit AM32 65A (4IN1) ESC V3 PRO is a 4-in-1 electronic speed controller (ESC) designed for 3S-6S input power. It supports telemetry feedback and current metering, and works with AM32 firmware.

Key Features

• 3-6S 32Bit 65A 4IN1 ESC V3 PRO
• Built-in telemetry capability: collects motor speed, current, voltage, and temperature in real time
• 6-layer board design with a 2+3OZ copper thickness structure
• 32-bit main control chip, paired with a stable 6288 driver chip
• TVS transient suppression diode
• 1000uF/35V high frequency low resistance filtering capacitor (power smoothing and noise reduction)
• Imported patch filter capacitors for improved filtering effect
• 24 high-power MOSFET
• Current detector (supports setting a current limit to control maximum motor output current)
• Supports PWM/DSHOT 300/600/1200

Specifications

Interface Definition

• VCC: Battery voltage detection signal output interface; connect to the flight control battery voltage detection port (output specification is battery voltage).
• GND: The ground wire is the negative pole of the power supply.
• CUR: Current detection signal output interface; connect to the flight control current detection port.
• TEL: Telemetry output port.
• M1: Input interface for throttle signal, corresponding to No.1 ESC.
• M2: Input interface for throttle signal, corresponding to No.2 ESC.
• M3: Input interface for throttle signal, corresponding to No.3 ESC.
• M4: Input interface for throttle signal, corresponding to No.4 ESC.

Software & Links

• Computer end ground station link: https://am32.ca/configurator
• Parameter tuning software: Esc_Config_Tool_1.82

For product support and setup assistance, contact support@rcdrone.top or visit https://rcdrone.top/.

What’s Included

• 3-6S 32Bit 65A (4IN1) ESC V3 (V3 PRO series)
• M3*8mm silicone case
• XT60 power line
• SH 1.0mm 8pin 30mm flat cable
• 1000uF/35V high frequency low resistance capacitor

Applications

• 3S-6S multirotor builds using a 30.5x30.5mm mounting pattern
• Setups requiring current meter and telemetry feedback
• Projects needing PWM or DSHOT 300/600/1200 ESC protocols

Details