Flywoo FlyLens 85 2S Brushless Whoop Drone Kit V1.3, 20mm Camera Mount, GOKU F405 HD 1-2S ELRS AIO V2

Overview

Flywoo FlyLens 85 2S O3 Drone Kit Brushless Whoop V1.3 is a brushless whoop drone kit designed with a lightweight, compact structure, a high-strength PC protective ring, and a three-point CNC camera damping platform. The standard version uses a 20mm camera size, suitable for O3 and micro cameras.

This Drone Kit version ships without a camera and VTX. It can be equipped with O3, O3 Lite, Walksnail, or HDZero systems (check dimensions before installation). Marketing materials also list: “Weighing less than 249g” and “Take off weight 80~130g (varying based on different versions)”.

Key Features

• High-strength PC injection-molded protective ring; embedded colorful neon light strip (remote control switch).
• Three-point CNC camera damping platform for stable video (described as reducing jelly-like effect).
• Bottom-mounted transmission module placement compartment for protection and enhanced heat dissipation.
• Quick-release upper and lower structure design; frame fixed with only four screws for easier maintenance.
• Quick-release battery compartment; battery mount includes two reserved fixing holes (front/back) for center-of-gravity adjustment.
• Reverse thrust (downward thrust) power system.
• Supports installation of peripherals; three fixed holes reserved for action camera installation; optional 12mm GPS mounting kit available.
• Compatible action cameras listed: Insta360 GO1/GO2/GO3, Runcam Thumb, Runcam Thumb Pro, Hawkeye Thumb.
• GPS expansion note: supports adding GPS with Goku GM10 Nano V3 module (default version does not include GPS; DIY soldering/installation required).
• Changelog (2024-04-10): FlyLens 85 V1.3 Frame kit updates include support for 9mm x 9mm motor mounting holes, reinforced camera mounting holes (bottom plate), optimized width around motor mounting holes/periphery, Micro-USB compatible with Type-C, and updated HD VTX bracket material.
• GOKU F405 HD 1-2S ELRS AIO V2 (42688) notes: new 9V BEC, electronic switch to turn off O3 air unit during Betaflight tuning to reduce overheating risk, and a new Type-C interface.

Specifications

For compatibility questions (camera size, digital system installation, parts selection), contact https://rcdrone.top/ or email support@rcdrone.top.

Configuration Table (Reference)

Performance Table (Reference)

What’s Included

• Flylens 85 x1
• 2S 750mAh TPU mount x1
• 2S 1000mAh mount x1
• Propeller x4
• Gasket x2
• Locknut x2
• Shock absorbing balls x2
• Clip x4
• Hex nut x2
• Hexagonal stud x2
• M1.4 x 3.5mm screws x12
• M1.6 x 6mm screws x4
• M2 x 3mm (rhs) screws x2
• M2 x 6mm (rhs) screws x1
• M2 x 10 (Flat Head) screws x2
• M2 x 10 (rhs) screws x2
• M2 x 12 (Flat Head) screws x2
• M2 x 18 (Flat Head) screws x2

Note: This Drone Kit version is listed with Transmission: \ and Camera: \ (no VTX/camera included).

Applications

• 2-inch brushless whoop builds where a protective ring and compact size are preferred
• FPV setup with optional digital image transmission systems (O3, Wasp, Walksnail, HDZero) or analog (per reference configuration table)
• DIY builds requiring a quick-detachable frame structure and modular component access

Manuals

FlyLens 85 drone resources (operation guides, installation guide, CLI files, and 3D STL download): https://flywoo.net/page/flylens-85-drone-download-center

Details

Flywoo FlyLens 85 features a ducted protective ring design with a front camera mount, quick-release battery compartment, and O3 HD 4K image transmission.

FlyLens 85 is promoted as an ultra-light whoop, with a stated takeoff weight of 80–130g depending on the version.

The GOKU F405 AIO pairs 2S voltage support and continuous 12A output with a built-in ELRS receiver and ICM42688 gyro for a compact whoop build.

The FlyLens 85 frame layout supports multiple FPV video systems—including O3, Wasp, Walksnail, HDZero, and analog—so you can build around your preferred setup.

The CNC camera mount uses a three-point rubber-damped platform to help isolate the lens from frame vibrations.

The Flywoo FlyLens 85 whoop frame uses a high-strength protective ring with an embedded neon light strip around the ducts.

The quick-release frame uses four screws and a sliding battery mount with front and rear fixing holes for center-of-gravity adjustment.

The FlyLens 85 uses a reverse-thrust power design with a downward VTX module compartment intended to add protection and improve heat dissipation.

The FlyLens 85 frame includes fixed action-camera mounting holes and supports Insta360 GO1/GO2/GO3, Runcam Thumb/Thumb Pro, and Hawkeye Thumb cameras.

FlyLens 85 supports adding an optional Goku GM10 Nano V3 GPS module later via available serial ports, with DIY soldering and installation.

The FlyLens 85 Drone Kit configuration lists a GOKU F405 1–2S 12A AIO with MPU6000 gyro, XT30 battery plug, and 1003 14800KV motors.

Performance specs list 2S takeoff thrust percentages, flight times, frame weights (no battery), and top speeds across FlyLens 85 versions.

The FlyLens 85 kit includes battery mounts, props, gaskets, clips, nuts, and assorted screws for assembly and maintenance.

The FlyLens 85 whoop frame measures about 128mm x 128mm with a 55mm overall height for sizing and fit checks.