MAD V122L IPE 36KV eVTOL Drone Motor - 50 kgf Max Thrust, 1620 g, 24S, 47.5 x 17.4 Prop
MAD V122L IPE 36KV eVTOL Drone Motor - 50 kgf Max Thrust, 1620 g, 24S, 47.5 x 17.4 Prop
MAD
Couldn't load pickup availability
Overview
The MAD V122L is an eVTOL drone motor designed for high-thrust multi-rotor VTOL platforms. It is specified for 18–21 kgf recommended hover thrust and up to 50 kgf maximum thrust per rotor, with an optimized motor weight of 1620 g. With large-pitch eVTOL propellers (47.5 inch class), it is intended to provide efficient and reliable power for endurance flights.
Key Features
- 36 KV (Industry Professional Edition)
- Recommended hover thrust: 18–21 kgf
- Maximum thrust: 50 kgf (maximum thrust may depend on battery, propeller type, air pressure, and other conditions)
- Electrical efficiency: >85%
- Centrifugal heat dissipation: YES
- Protection rating: IP35
For compatibility checks (prop/ESC/battery matching) and order support, contact support@rcdrone.top or visit https://rcdrone.top/.
Specifications
| Motor Model | MAD V122L IPE V2.0 |
| KV | 36 KV |
| Number of pole pairs | 19 |
| Stator | Anticorrosive |
| Varnished wire degree | 220°C |
| Magnet degree | 180°C |
| Motor size | D:144.6 × 53 mm |
| Motor weight | 1620 g |
| No load current | 1.06A/30V |
| Internal resistance | 81 mΩ |
| Maximum current | 133 A |
| Maximum power | 12830W |
| Maximum torque | 34 Nm |
| Maximum thrust | 50 kgf |
| Recommended hover thrust | 18–21 kgf |
| Single rotor take-off weight | 18kg ~ 21kg |
| Nominal voltage | 24S lipo battery |
| Degree of protection | IP35 |
| Cable length | 150 mm (extended enameled wires) |
| Centrifugal heat dissipation | YES |
| Rotor balance | ≤10 mg |
| Motor balance | ≤20 mg |
| Propeller mounting holes | D:50 M6×6 |
| Motor mounting holes | D:50 M6×4 |
| Shaft diameter | IN: 20 mm |
| Bearing | 6904ZZ*2 |
| Disruptive test | 500 V |
| Recommended propellers | 47.5 x 17.4 |
| Recommended ESC | MAD AMPX 200A (12-24S) |
| Product boxed weight | 2600g (260 x 210 x 120 mm) |
| UAV take-off weight | 24S-47.5 inch: 76kg (Quadcopter) / 114kg (Hexacopter) / 152kg (Octocopter) |
Drawing and Mount Holes (Key Dimensions)
- Overall diameter: Ø144.6
- Body length dimension shown: 50
- Motor mounting holes: Ø50-M6*4
- Propeller mounting holes: Ø50-M6*6
- Additional drawing dimensions shown: Ø60, Ø65, 3.5, Ø6.1, Ø50, Ø25, 40, M6-P1mm
What’s Included
- Motor x1
- Propeller Plate x1
- Locating Pin x1
- 4.0mm Bullet Connector x3
- Heat Shrinkable Tube x3
- M6*25 Motor Screws x4
- M6*40 Propeller Screws x4
- Screws / Sticker x2
Solution (Recommended System Example)
| VTOL Motor/KV | VTOL Prop | VTOL ESC |
| MAD V122L IPE 36KV | Fluxer VTOL 40x13.1/42x14 | MAD AMPX 120A (12-24S) |
| VTOL Battery (Lipo)/Voltage | VTOL Thrust Per Motor (kg) | Recommended takeoff weight (4 axes) |
| 24S (4.3V/S) / 84-52V | 16kg ~ 20kg | 76kg |
Note: For a coaxial configuration, a total thrust loss of 25% should be considered.
Test/Chart Notes (from provided chart)
- Analytical graph parameters: I (Current), P (Input Power), η (Electrical Efficiency), T (Thrust), n (Rotational Speed)
- Measurement note: data measured at input voltage 96 V, temperature 25°C, at sea level; rotational speed adjusted by throttle
Details
MAD V122L IPE 36KV motor drawings detail the mounting hole pattern and overall dimensions for integration.
The MAD V122L motor set includes a propeller plate, locating pin, bullet connectors, heat-shrink tubing, and mounting hardware for installation.
The MAD V122L 36KV eVTOL motor is listed at 1620 g with an efficiency rating of over 85% and thrust figures up to 50 kgf on the spec sheet.
Related Collections
