T-Hobby AMZ 20x10 Carbon Fiber Propeller for 3D Planes (AMZ 20*10), Power System Matching 72-76"

Overview

The T-Hobby AMZ 20x10 is a carbon fiber propeller for 3D planes, designed for consistent feel in aerobatic maneuvers. Product graphics describe it as an AMZ Series carbon fiber propeller for 3D flight and the final component in the power system.

Key Features

• AMZ Series carbon fiber propeller (as labeled in images).
• Manufacturer-stated material and build concepts: T800 large-mesh carbon fiber; aerospace grade core filling; optimized weight distribution design.
• Manufacturer-stated performance comparisons (baseline not specified in the images): 16% dynamic intensity; 22% fatigue intensity; 11% rudder efficiency; 9% improved aerodynamic efficiency.
• Manufacturer-stated response times (comparison note shown in images): 0.11s acceleration time; 0.17s deceleration time.
• Power system matching guidance shown for AMZ 20*10 (ESC, motors, battery).

For fitment and ordering support, contact https://rcdrone.top/ or support@rcdrone.top.

Specifications

Engineering drawing / spec sheet text shown in images (Model NO. AMZ22*10)

What's Included

• Packaging Box*1 (Volume: 640*80*35mm) (shown in images)
• Propeller*1 (shown in images)
• Prop Bag*2 (shown in images)

Applications

• 3D flight / aerobatic maneuvers (rolls, pull-ups, dives) as described in product graphics
• Hovering, accelerating, and high-speed flight (as described in product graphics)

Notes (text shown in images)

• Prop marked with "L" is for CW; "R" for CCW (aerial view).
• Propeller structural strength has been rigorously tested. Use within the recommended maximum thrust range. Exceeding the ultimate thrust limit will damage the propeller blades.
• Do not test blade strength by hand-bending, as this does not replicate actual flight stress conditions and may cause blade damage.
• Make sure all the accessories are mounted properly.
• Check the propellers before flight and make sure they are in good condition. Replace propellers with new ones if a fault is found.
• Storage requirements: avoid corrosive gases and hazardous environments; maintain ambient conditions within -10°C to 50°C and relative humidity <85% RH; strictly adhere to these parameters during long-term storage.
• Apply anaerobic screw locking glue of medium or above strength when installing propellers onto motors.
• Use the propellers in compliance with local laws and regulations.

Details

The T-Hobby AMZ carbon fiber propeller features an AMZ 20x10 option and matching series sizes labeled 18x10 through 23x10.

The AMZ 20×10 prop is paired with AM740 185KV/220KV motor and AM156A ESC recommendations for 72–76 in (120E) 3D aircraft using a 12S 3300–4200mAh battery.

The AMZ22*10 carbon fiber propeller spec sheet lists a 22-inch diameter, 10-inch pitch, CF+epoxy material, and the included packaging box, propeller, and prop bags.