T-Hobby AMZ21x10 Carbon Fiber Propeller for 72-76 Inch 3D Aerobatic Planes (35-38cc)

Overview

The T-Hobby AMZ21x10 carbon fiber propeller is designed for 72-76 inch 3D aerobatic planes (35-38cc), focusing on consistent throttle response and precise handling for advanced aerobatic maneuvers.

Material and structure are specified as CF + Epoxy with T800 large-tow carbon fiber, intended to reduce deformation and maintain stable output during rapid maneuver changes.

Key Features

• T800 large-tow carbon fiber (AMZ Series)
• Claimed 0.11s acceleration time and 0.17s deceleration time (from product graphic)
• Claimed +11% rudder efficiency and +9% improved aerodynamic efficiency (from product graphic)
• Claimed +16% dynamic intensity and +22% fatigue intensity (from product graphic)
• Prop rotation marking: “L” for CW and “R” for CCW (aerial view)

Specifications

Recommended Power System (T-Hobby Match)

• AM156A (5-14S ESC): 72-76 in / 35-38cc; suitable for 12S setups
• AM740 KV185: 72-76 in; 14.8 kg thrust
• AM780 KV190: 72-76 in; 16.2 kg thrust

Recommended Battery: 12S 3300-4200mAh
Recommended Aircraft Size: 72-76 in 3D planes (35-38cc)

What’s Included

• 1 x AMZ 21x10 Propeller
• 2 x Propeller Protective Bags
• 1 x Packaging Box (590 x 70 x 35mm)

Applications

• 3D aerobatic flight setups for 72-76 inch aircraft (35-38cc class)

For product support, setup guidance, or order assistance, contact support@rcdrone.top or visit https://rcdrone.top/.

Notes

• Use within the recommended maximum thrust range. Exceeding the stated limit may damage the blades.
• Do not test blade strength by hand-bending.
• Confirm all accessories are mounted properly before use.
• Inspect the propeller before each flight; replace if any fault is found.
• Storage: avoid corrosive gases and hazardous environments; keep within -10 to 50°C and humidity <85% RH for long-term storage.
• When installing on motors, apply anaerobic screw locking glue of medium or higher strength.
• Use in compliance with local laws and regulations.

Details

The T-Hobby AMZ 21x10 carbon fiber propeller is paired with AM740 KV185/AM780 KV190 motors and an AM156A ESC for 72–76 inch (35–38cc) 3D planes.

The AMZ21x10 propeller is a 21-inch, 10-inch pitch CF+epoxy design, with a packing list showing one propeller plus the packaging box and two prop bags.