T-Hobby AMZ 23x10 Carbon Fiber Propeller (AMZ23*10) for 84"-89" 3D Planes, CF+Epoxy, 23inch

Overview

The T-Hobby AMZ 23x10 carbon fiber propeller (AMZ series) is designed for 3D flight use on large aerobatic aircraft. The images indicate application for 84"-89" 3D planes (55CC-65CC) and a carbon fiber construction.

Key Features

• AMZ series carbon fiber propeller for 3D flight; designed to reduce deformation and support consistent power output.
• Material callout: T800 large-mesh carbon fiber.
• Performance callouts shown: 16% dynamic intensity; 22% fatigue intensity.
• Response time charts shown: 0.11s acceleration time; 0.17s deceleration time (comparison note shown in image).
• Efficiency callouts shown: 11% rudder efficiency; 9% improved aerodynamic efficiency (as described in image notes).

Customer service: https://rcdrone.top/ or support@rcdrone.top.

Specifications

What’s Included

• Packaging Box*1 (Volume: 640*80*35mm)
• Propeller*1
• Prop Bag*2

Applications

• Shown application: 84"-89" 3D planes (55CC-65CC).
• Shown power system matching references: AM780/AM850 + AM216A.
• Shown component notes: AM216A (ESC) 5-14S; AM780 160KV 16.7kg; AM850 195kv 18.8kg.
• Shown recommended battery: 12S 4500-5800mah.

Notes (from package insert)

• Prop marked with “L” is for CW; “R” for CCW (aerial view).
• Use caution during operation; spinning propellers may cause harm.
• Use within the recommended maximum thrust range; exceeding the ultimate thrust limit may damage propeller blades.
• Do not test blade strength by hand-bending.
• Ensure accessories are mounted properly; check propellers before flight and replace if faults are found.
• Storage requirements shown: avoid corrosive gases and hazardous environments; maintain ambient conditions within -10°C to 50°C; relative humidity ≤85% RH; follow these parameters during long-term storage.
• Apply anaerobic screw locking glue of medium or above strength when installing propellers onto motors.
• Use in compliance with local laws and regulations.

Details

The T-Hobby AMZ 23x10 carbon fiber propeller features a clear size marking on the blade for quick identification during setup.

The T-Hobby AMZ 23x10 propeller is paired with AM780/AM850 motors and an AM216A ESC for 84–89 inch (55–65cc) 3D aircraft, with a recommended 12S 4500–5800mAh battery.

The AMZ23*10 prop is a 23-inch diameter, 10-inch pitch CF+epoxy blade (76g) and includes one propeller, one box, and two prop bags.